650862
12
Zoom out
Zoom in
Previous page
1/34
Next page
12
3. USING THE PRODUCT
A. ASSEMBLING THE JUICE EXTRACTOR
1. Place the juice extractor housing base on a level surface.
2. Make sure the safety bar is placed horizontally to the housing
base, that is, in an unlocked position.
3. Place the filter housing on the housing base.
4. Firmly lock the filter to the middle of the filter housing ensuring
that it is securely in place.
CAUTION: Careful not to touch the blades at the bottom of the
filter.
5. Put the lid on the filter housing by aligning the feed tube with
the filter.
6. Put the safety bar in the locked position by pulling the bar
onto the lid. Pull the bar back until it clicks into place.
7. Slide the pusher into the feed tube by aligning the slot of the
pusher into the recess located inside the feed tube.
8. Put the pulp container in place at the back of the juice extractor
by slightly tilting its opening to slide it under the lid.
9. Place the juice pitcher under the flow spout at the front of the
juice extractor with the handle facing the front.
10. Make sure that the pour spout is properly open. Never press
fruit when the pour spout is closed.
B. DISMANTLING THE JUICE EXTRACTOR
1. Turn off and unplug the juice extractor.
2. Remove the pusher from the feed tube.
3. Remove the pulp container from the juice extractor.
4. Lower the security bar into the unlocked position.
5. Lift and remove the lid from the filter housing.
6. Gently remove the filter housing without removing the filter.
You will only be able to remove the filter once the housing has
been removed.
CAUTION: Do not touch the blades at the bottom of the filter.
7. Make sure the flow spout is in the closed position. Remove the
juice pitcher.
C. USING THE JUICE EXTRACTOR
1. Make sure that the juice extractor is properly assembled. (See
instructions section 3A).
2. Plug the unit into a 230V mains socket.
3. Check that the flow spout is open. NEVER PRESS FRUIT WHEN
THE POUR SPOUT IS CLOSED.
4. Wash the selected fruit or vegetables.
5. Press the I/O button to start the fruit extractor. The ring of blue
light will come on.
6. Lift the pusher and remove it from the feed tube. Insert the
food and push the food using the pusher, pressing firmly.
7. The juice will flow into the juice pitcher and the pulp will collect
in the pulp container.
8. When all the juice has been extracted, press the I/O button to
turn off the juice extractor.
9. Close the flow spout before removing the juice pitcher.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuisinart CJE500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuisinart CJE500E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info