Manual Cuisinart CBT 500 E (page 6 of 41) (English)

73449

Zoom out

Zoom in

1/41

3. TIMING YOUR RECIPES: The SmartPower Premier

™

600-Watt

Blender features a 5-minute Count-Up

™

Timer, so that you can time

your recipes and guarantee perfect results. The timer begins count-

ing from 0 as soon as you push your desired speed: High, Low, Pulse

or Ice Crush. The timer will continue to count up even if you change

speeds during blending. You can pause the timer by pausing the

blending process. Do this by pushing the button corresponding to

the speed at which you are currently blending. For example: If you

are blending in Low speed and you push the Low speed button, the

blender will stop blending and the timer will stop counting, but the unit

will remain on. To continue blending and timing your recipe, push one

of the speed buttons. The timer will also stop counting when it reach-

es 5:00 minutes. The timer will only reset itself when the Off button is

pushed.

4. START BLENDING: Press the On button. The red LED indicator light

will illuminate, indicating that the blender is turned on but no speed

has been selected.

5. CHOOSE BLENDING SPEED: Press High or Low button to determine

the speed at which you would like to blend the ingredients. Both the

On indicator light and the activated speed indicator light will glow. The

blender will now be functioning at the desired speed. It is possible to

switch speeds without pressing the Off button, by simply pushing the

other speed button.

Note: The Count-Up

™

timer will begin counting when the desired speed

button is pushed. The timer will continue to count if you change speeds.

6. TO PAUSE OR STOP BLENDING PROCESS

a. To Pause Blending Process: Push the button corresponding to

the speed at which you are currently blending. For example: If you

are blending on High speed, push the High speed button and the

blender will stop blending, but the unit will remain on.

Note: By pausing the blending process, you will also pause the timer.

The timer will pause until you start blending again.

b. To Stop Blending Process: Push the Off button when you are

finished with your recipe and would like to turn the blender off.

Note: When you push the Off button, the timer will stop counting and

the LED display will reset to 0:00. When the blender is turned back on

and a speed button is pushed, the timer will begin to count from 0:00.

7. PULSE MODE: The pulse mode allows you to create a burst of power

for quick, efficient blending. To use the pulse function, push the On

button and the red LED indicator light will illuminate. Push the Pulse

button, and the pulse LED indicator light will blink. Push and release

the desired speed button. Repeat as desired. You determine the dura-

tion of each pulse. While pulsing, the LED indicator light will glow.

The pulse function can be used to break apart larger pieces of food

or to control the texture of food when chopping. The pulse function is

also effective in starting the blending process when you do not want

continuous power, or when processing items that do not require an

extended amount of blending.

Note: The timer will count when you push or hold down the Pulse

button. The timer will pause when you release the Pulse button.

8. TO CRUSH ICE: The SmartPower Premier

™

600-Watt Blender motor

is strong enough to crush ice without liquid at any speed; however for

your convenience, we have preset the best speed for ice crushing. To

give you greater control, the ice crush function automatically operates

as a pulse function. To crush ice, place ice cubes in the blender jar.

Press the On button. The On indicator light will illuminate. Press the

Ice Crush button in short pulses until ice is crushed to desired consis-

tency. See Recipe Tips section on page 8 for more details.

Note: The timer will count when you push or hold down the Ice Crush

button. The timer will pause when you release the Ice Crush button.

9. TO DISLODGE FOOD: Use a rubber or plastic spatula to help remove

food lodged around the cutting assembly. DO NOT USE SPATULA

UNTIL YOU HAVE TURNED THE BLENDER OFF. Replace the cover

and measured pour lid and continue blending, if necessary. Make sure

spatula is not inside the blender jar before blending.

10. WHEN FINISHED BLENDING: Press the Off button and unplug the

blender from the electrical outlet. Never remove the blender jar from

the motor base until the blender is off. Do not twist locking ring from

blender jar when removing jar from motor base. Simply lift blender jar

from motor base. Do not place hands into blender jar with blender

plugged in.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cuisinart CBT 500 E in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cuisinart CBT 500 E Manual

Product: