ENGLISH
HOW TO CLEAN
13
❶Take out soft steam cap as in the
figure.
❺When assembling the soft steam
cap, match the sill of the below and
insert the cap firmly by pressing it in
the direction of the arrow.
1. Handle must be turned to "Lock" during Cooking.
When the lamp is turned on it means that it is ready to cook.
2. After cooking, turn the handle from "Lock" to "Unlock" turn the
handle to open.
If there is unreleased steam in the Inner pot it might be hard to turn the
handle. In this case twist he pressure weigh and let the excess steam out.
Do not open by force.
3. Handle must be turned to "Unlock" when opening and closing.
·If the lamp does not turn on, it
would not operate the "Cook"
and "Preset" buttons. Make
sure the handle is located in
"Lock".
Lock
1. Check to make sure the inner
pot is place correctly inside
the main body.
2. To close the top cover turn
the handle to unlock, in
shown in the picture on the
right.
3. If there is excess steam inside the
inner pot it might be difficult to lock
the handle. Twist the pressure
weight and allow the excess steam
to release.
Then try to turn the handle again.
❻When installing the soft steam cap,
insert the cap firmly by pressing in
the direction of the arrow indicated
in the figure.
❷Disassemble soft steam cap in the
rear by pressing the hook in
direction, at the arrow and wash it
frequently with an neutral detergent
and sponge.
❸Disassemble the rubber packing in
the direction of the arrow.
❹When fitting the rubber packong into
the plate, please make sure the
packing is facing the correct
direction.
※ Do not touch the surface of the soft steam cap right after cooking. You can get burned.
Do not try to close the top cover by force. It can cause problems.
How to clean the soft steam cap
How to use handle
When lid does not close perfectly
How to use with the packing
