15
ENGLISH
HOW TO SET CURRENT TOME / HOW TO
SET OR CANCEL VOICE GUIDE FUNCTION
How to set current time
Press mode button once.
Set 0'clock and 25 minute as pressing
menu/selection button.
When finishing to set time you want, press “Set” button.
■ About Lithium battery
■ How to set current time during keep
warming mode
■ What is blackout compensation
▶ Press mode button for more than 1sec
▶ ”Current time mode press yes button” after setting current time with
selection button
▶ Menu/selection button blinks and Mode, Set and Cancel buttons turn ON.
▶ Colon mark (:) on the sec. screen is blinking once per second.
▶ 1 min up “ “ button
1 min down “ “ button
▶ 10 min up or down “ “, “ “ keep pressing
▶ Careful of setting am, pm
▶ In case of 12:00 it is 12:00pm.
▶ Set button blinks and Mode, Menu/Selection and Cancel buttons
turn ON.
▶ If it is over 7sec without yes button, setting time will be canceled
with voice, “it is canceled due to overtime”.
·This product contains lithium battery for improving blackout
compensation and time. Lithium battery lasts 3 years.
·When current time is not displayed on the screen, it means
the battery is exhausted. It should be replaced.
1. Press Cancel button to cancel keep warm and
then press Mode button over 1 time to set
current time.
2. After setting time, press keep warm button to re-
start keep warm.
·This product remembers and maintains previous condition and
processes. After finishing blackout, it operates immediately.
·If blackout happens during cooking, the cooking time will be
delayed depending on blackout time.
·If the rice became cold because of blackout, warming will be
cancelled.
ex)8:25am now
Voice guide volume control
(The function which can control volume and cancel)
To enter this function, press Mode button 2 times, Mode button needs to be pressed for over 1 second at the first time.
“ “ sign is displayed when entered volume control mode by pressing
Mode button 2 times.
Press button to set “5”, that is the maximum volume sound.
When finish setting desired volume, press Mode button to store.
If set value became “0” by pressing button, voice guide function is off.
▶
Set button blinks and Mode, Menu/Selection and Cancel buttons
turn ON.
▶
Keep the button pressed, and the button will turn to Continuous.
▶
Set to desired voice volume, and press Set button.
<Standby mode>