723540
21
Zoom out
Zoom in
Previous page
1/29
Next page

Put it in the inner pot with the measured water after wash the rice and turn the Lock/Unlock handle to Lock.
Presetting time is the time when the rice cooking is completed. (According to the amount of rice the finishing time may vary)
1
Check if the current time and the menu are correct.
The Presetwill be displayed.
Press the Cancel button when you want to cancel the preset cooking.
The preset time will be stored.If you want to cook the rice to the preset time already entered,
press the Timer button and then press the Pressure Cook/Turbo button.
If you want to check the current time during the Timer cooking, press the Hrs/Soak or
Min/Heat button for 2 seconds.
3
Set the presetting time.
4
Press the Timer button.
If you press the Timer button, the “Preset” sign will be displayed with the preset time.
After pressing Timer button, set the preset time within 7 seconds.
The default for set time is 6:30 AM
If you press the Timer button without setting the lock/unlock handle on the top cover to “Lock”,
the sign will be on the display and dont operate.



If the rice is old and very dry, the result of the cooking may not be good.
If the rice is not well cooked increase the amount of water about half-scale.
Press Cancel button and restart to change the preset time.
Set the presetting time to no more than 13 hours especially if the presetting time exceeds 7 to 8 hours during the
summer time, the rice can smell bad.
Preset time will be changed automatically and displays “ when setup time exceeds 13 hours.
If the preset time is shorter than cooking time in the below table, the cooking starts immediately.
Precautions for preset cooking
Using range of Timer Cook for each menu
Refer to page 10 for the time setting method
If the current time is not set correctly, the presetting time also be incorrect.(Make sure not to change A.M. and P.M.)
If the menu is incorrect, press the Menu button and select the desired menu.
Caution : Press Hrs/Soak, Min/Heat button to set a cooking time, When use the Multi cook preset mode.
2
Press the Timer button.
Set the presetting time with the Hrs/Soak and Min/Heat button.
If the preset time is already correct, you do not need to set time again.
Example) When you want to eat the rice at 7:30AM.
Press the Timer button (The “Preset” sign will be displayed) and then press the
Hrs/Soak button, set time at 7 hours. And press the Min/Heat button, set time at 30 minutes.
(The unit for the Hrs/Soak button is 1 hour and the unit for the Min/Heat button is 1 minute.)
Using
range of
preset
timer
Menu

20
Glutinous

Sushi
󰇇
Mixed/Brown
󰓫
GABA
󰓫
Multi Cook
󰄱
Nu Rung Gi
󰁷
Nutritious

Dried

From
(33minutes
+ My mode)
to 13 hours
From
46minutes
to 13 hours
From
(47minutes
+ My mode)
to 13 hours
From
(51minutes
+ My mode)
to 13 hours
From
(setting time
+1minutes)
to 13 hours
From
(40minutes
+ My mode)
to 13 hours
From
34minutes
to 13 hours
From
(42minutes
+ My mode)
to 13 hours
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuckoo CRP-HF06 Fuzzy Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuckoo CRP-HF06 Fuzzy Series in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info