Manual Cubify CubeX (page 34 of 37) (English)

534695

Zoom out

Zoom in

1/37

12. The CubeX software will then open windows explorer. Navigate to the

rmware you wish to install and open it. (Fig. 119)

13. The CubeX software will now install the rmware onto the CubeX printer. (Fig.

120)

14. Once the rmware is installed unplug the printer from the main power for

30 seconds and unplug the USB from the computer. (If you are upgrading

from rmware version 1.01, please skip to the section RESTORING THE

SETTINGS TO YOUR CUBEX 3D PRINTER FIRMWARE FROM V1.01)

Fig. 119

Fig. 120

Fig. 114

Fig. 116 Fig. 117

Fig. 118

Fig. 115

Fig. 112 Fig. 113

7. Press the tick on the screen to put the CubeX 3D Printer into boot

loader mode. (Fig. 112 & 113). Release the function button after

“Setting saved” message disappears. Your printer is now in rmware

mode.

8. Remove the USB stick from the CubeX 3D Printer. (Fig. 114)

9. Open the CubeX software on your computer. (Fig. 115)

10. Plug your CubeX into the computer using the PC connection USB

port. (Fig. 116 & 117)

11. Navigate to the settings tab to the CubeX software and press the Firmware update button.

(Fig. 118)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cubify CubeX in the language / languages: English as an attachment in your email.

The manual is 4,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cubify CubeX Manual

Product: