Manual Cubify CubeX (page 33 of 37) (English)

534695

Zoom out

Zoom in

1/37

• Observe the gap between the print jet and

Print Pad from the front of the machine.

(Fig. 107) Press and hold the Z +/- buttons

to move the Print Pad. (Fig. 108)

Fig. 107 Fig. 108

• Make sure the print jet is clean. For cleaning instructions, see ‘MAINTAINING YOUR CUBEX > Cleaning the Print Jet’).

• Starting with a gap between the Print Pad and the print jet, move the Print Pad towards the print jet using the up (+) “SET

Z HEIGHT” touchscreen. Observe the Print Pad as it approaches the print jet.

• Stop raising the Print Pad as soon as the print jet touches the Print Pad’s surface. If the Print Pad goes too far, simply

move the Print Pad back and repeat the approach.

• Lower the Print Pad by 0.1 to produce a large enough Z gap for printing.

CAUTION: IF THE PRINT JET PUSHES AGAINST THE PRINT PAD TOO HARD, THE PRINT JET WILL BE

FORCED INTO THE PRINT PAD FOR THE ENTIRE FIRST LAYER OF PRINTING. THIS WILL DAMAGE

BOTH THE PRINT PAD AND THE PRINT JET. MAKE SURE THE PRINT PAD SPRINGS ARE NOT

COMPROMISED WHEN SETTING THE PRINT JET AGAINST THE PRINT PAD.

• Clicking the ‘Function’ button gives the option to save the gap setting to the printer’s memory, which will be retained even

after the printer is powered off. This Z gap value will be applied for each subsequent print.

UPDATING CUBEX FIRMWARE

If you are unsure what version of rmware is currently installed on your CubeX 3D Printer,

navigate to the UPDATE button on the main menu and the version number will be located

beneath it. (Fig. 109)

Fig. 109

Fig. 110

5. Plug your USB stick into the CubeX 3D Printer. (Fig. 110)

Fig. 111

6. Navigate to the “Update” button on the main menu. Press and hold the function button. (Fig.

111)

SET Z HEIGHT

Offset:-19.82

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cubify CubeX in the language / languages: English as an attachment in your email.

The manual is 4,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cubify CubeX Manual

Product: