648454
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
The table explains the various lamps:
Mains voltage connected.
If the mode is incorrect, the charger cuts the charging/voltage supply.
The charger switches to error mode before starting in the following
circumstances:
If the battery has been connected with reverse polarity to the charger
terminals.
The charger’s analysis function has interrupted the charge.
The charger has been in start mode for a time that exceeds max time.
Where possible, correct the cause of the fault and start the charge by
pressing the “MODE” or “RESET” button. The charger restarts in the
mode that was last used.
1
Desulphation
2
Soft Start
Charge acceptance check
3
Bulk Charge
4
Absorption Charge
5
Analysis
6
Recond
7
Maintenance Charge – Float
8
Maintenance Charge – Pulse
CHARGING
Connection of the charger to batteries that are tted in vehicles:
1. The mains cable should not be connected to the wall socket when connecting or
disconnecting the battery leads.
2. Identifythepolethatisearthed(connectedtochassis).Earthisnormally
connected to the negative terminal.
3. Charging of negatively earthed battery: Connect the red lead to the positive pole
of the battery and the black lead to the vehicle chassis. Be careful not to connect
the black lead close to the fuel pipe or the battery.
4. Charging of positively earthed battery: Connect the black lead to the negative pole
of the battery and the red lead to the vehicle chassis. Be careful not to connect the
red lead close to the fuel pipe or the battery.
Connection of the charger to batteries that are not tted in vehicles:
1. The mains cable should not be connected to the wall socket when connecting or
disconnecting the battery leads.
2. Connect the red lead to the positive pole of the battery and the black lead to the
negative pole.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek Multi XS 4003 model 1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek Multi XS 4003 model 1035 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ctek Multi XS 4003 model 1035

Ctek Multi XS 4003 model 1035 User Manual - German - 12 pages

Ctek Multi XS 4003 model 1035 User Manual - Dutch - 10 pages

Ctek Multi XS 4003 model 1035 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info