Manual Crivit TB-1701 IAN 103760 (page 5 of 34) (English, German, Dutch, Danish, French)

736621

Zoom out

Zoom in

1/34

7GB/IE

• Parents and other supervisors should be aware

of their responsibility, since children‘s natural

love of playing and experimentation can lead

to situations and behaviour for which the

training equipment was not designed.

• If you allow children on the equipment, you

should bear in mind their mental and physical

development and, in particular, their tem-

perament. Children should be supervised as

appropriate and, in particular, the correct

usage of the equipment should be pointed out

to them. This training equipment is not, under

any circumstances, suitable to be used as a

toy.

• Ensure that you use an appropriate underlay

when using the equipment on sensitive ﬂoors,

in order to protect the ﬂoor from damage.

Assembly

For the most part, the training bench is already

preassembled. Only the front stand pipe needs

to be assembled.

Tools required

1 x Hex-key, size 6

1 x Open-ended wrench, size 17

Step 1 (fig. B, C, D)

Push the base (1) into the bar (9) and secure this

connection using the footrest (7) and the plastic

nut (3).

Note: You can change the position of the footre-

st (7) and the position of the exercise bench

(10) depending on your height and experience.

Please ensure that you tighten the connection

securely again following adjustment.

Step 2 (fig. E)

Now mount the already assembled stand pipe

onto the training bench (10).

Step 3 (fig. F)

Fasten the stand pipe (1/9) using the assembly

bolt (4) provided, and tighten this securely.

Step 4 (fig. G)

Next, fasten the security pin (5) as shown.

Note! This pin prevents the whole base

from collapsing.

Step 5 (fig. H)

Attach the handle (2) to the upper end of the

stand pipe (1/9) and fasten it with the second

plastic nut (3) and the washer (6) provided.

Note! For exercise K and N, attach the

handle (2) with the adjustment screw

facing outwards. For all other exercises,

the adjustment screw should face the

bench cushion.

Step 6

A storage bracket for the dumbbells is located

underneath the training bench.

Turn the bracket downwards and screw it tightly

in place.

Fold mechanism

To fold the base, pull out the security pin (5) and

gently push the base forward. The base can then

be folded.

General training instructions

• The following exercises are only a selection.

Additional exercises can be found in relevant

specialist literature.

• Wear comfortable sports clothing and trainers.

• Warm up before every training session and

gradually reduce the intensity of training.

• Increase the intensity of training slowly and

ensure that you take sufficient breaks between

exercises.

• Perform the exercises at a steady pace.

Breathe calmly.

• Perform all exercises steadily - not jerkily and

quickly.

• Be sure to breathe steadily. Breathe out when

straining and breathe in when relaxing.

Note!

Should you experience any discom-

fort or feel unwell, stop the exercises

immediately and contact your doctor.

When performing exercises with the

training bands, be careful not to stretch

the bands further than 190cm. The force

chart shows the force needed in order

to pull the training bands to the appro-

priate length. The range of tolerance

for this force is +/- 20% (Force chart for

training bands, see technical data).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit TB-1701 IAN 103760 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit TB-1701 IAN 103760 Manual

Product: