Manual Crivit Inshore 335 V IAN 282780 (page 15 of 54) (English, German, Dutch, French, Portuguese, Spanish)

736874

Zoom out

Zoom in

1/54

2. To deﬂate the side chambers

/ screw the

valves completely from their base mountings.

Kit bag

A kit bag is included with this article in which

the kayak is stowed away for transport and

storage. In order to close this, please use the

200cm rope. The kit bag is also useful when

aﬂoat for the splash-proof safekeeping of provi-

sions, clothes etc. Please remember that this bag

is not watertight. For this reason, do not store

sensitive objects in it, for example, cameras.

For use aboard it is advisable to remove the

rope and to ﬂatten and roll up the upper end,

closing it when necessary with the hook and

loop fastener.

Storage bag

A splash-proof storage bag is also included

which can be attached to the back of the front

seat using the hook and loop fastener.

Small objects can be stowed away here to keep

them dry but please remember that this bag too

is not completely watertight. Please do not store

sensitive objects here.

Transport

Always transport the kayak with two adults and

use the carrying straps

at the front and back

of the craft.

Care / Maintenance / Storage

WARNING!

Only use care products that do not

contain traces of acids or petroleum and

never use silicone-based products.

1. Clean your kayak thoroughly after every use

with fresh water and mild soap to remove salt

crystals, sandy granules and other small dirt

particles. Leave it to dry completely.

2. Lay both of the upper side pipes into the

inside of the kayak and fold them together

carefully.

3. Store your kayak in a clean and dry place

away from direct sunlight and somewhere

where there are no great temperature

ﬂuctuations. Pay attention to the fact, that the

kayak is not wrinkled but lays ﬂat, and keep

well out of the reach of rodents.

Repairs

WARNING!

You should not attempt to repair large

damaged sections by yourself.

You can repair small areas with the enclosed

repair kit

1. Deﬂate the kayak completely and clean the

area to be repaired with an alcohol-based

solution. Roughen up the damaged area

surrounding the hole or tear with a ﬁne sand

paper.

2. Cut a patch to cover the damaged area. The

patch should overlap the damaged area by at

least 1.25cm on all sides.

3. Apply the glue to the kayak as well as to the

patch. Allow to dry for approx. 3 minutes.

4. Press the patch down ﬁrmly using a soft

object. Make sure that you are working on a

ﬂat, even surface. Remove any air bubbles

with a rounded object, gently pushing the

bubbles in an outward direction.

5. Always wait at least 12 hours after a repair

before pumping up the kayak once again.

Disposal

Dispose of the article and the packaging materi-

als in accordance with current local regulations.

Packaging materials such as foil bags are not

suitable to be given to children. Keep the packa-

ging materials out of the reach of children.

GB/IE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit Inshore 335 V IAN 282780 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit Inshore 335 V IAN 282780 Manual

Product: