Manual Crivit IAN 347012 WR 8221 (page 15 of 42) (English, German, Dutch, French, Polish, Swedish)

750298

Zoom out

Zoom in

1/42

17GB/IE

Extra caution – risk of

injury to children!

• Keep the packaging materials

away from children. There is a risk

of suﬀocation!

• The product is not suitable play

equipment and must be stored

somewhere that is inaccessible to

children when not in use. To elimi-

nate the risk of injury, the product

must not be within reach of chil-

dren during the workout.

• Point out to children speciﬁcally

that the product is not a toy.

• Children must not be allowed play

with the product.

Dangers due to wear

and tear

• Check the product for damage or

wear before each use. Only use the

product if it is in perfect condition!

The safety of the product can only

be guaranteed if it is regularly

inspected for damage and wear.

If, for example, the strap or the

handles of the pull rod show signs

of damage, do not use the product

anymore.

• Use only original replacement parts.

• Protect the product from extreme

temperatures, sun and dampness.

Improper storage and use of the

product could lead to premature

wear and tear, and possible

breakages in the structure, which

could result in injuries.

• Do NOT permanently secure or

screw the product to the ﬂoor.

Doing so can cause considerable

damage to the product.

Warnings on batteries!

• Remove the batteries when they

are flat, or if the product is not in

use for an extended period.

• Do not use different types or

brands of battery or new and used

batteries together or batteries with

different capacities as these can

leak and cause damage.

• Ensure the polarity (+/-) is correct

when inserting the batteries.

• Replace all batteries at the same

time and dispose of the old batteries

as prescribed.

• Warning! Batteries must not be

charged or reactivated by other

means, taken apart, thrown into

fire or short-circuited.

• Always keep batteries out of reach

of children.

• Do not use rechargeable batteries!

• Cleaning and maintenance must

not be carried out by children

without supervision.

• Clean the battery and device

contacts as needed and before

inserting.

• Do not expose the batteries to

extreme conditions (e.g. radiators

or direct sunlight). Otherwise there

is an increased risk of leakage.

• Batteries can be life-threatening if

swallowed. Therefore, store batter-

ies in a place inaccessible to small

children. Medical attention must

be sought immediately if a battery

is swallowed.

Danger!

• Handle damaged or leaking

batteries with extreme caution and

dispose of them properly as soon

as possible. Wear gloves when

doing so.

• If you come into contact with bat-

tery acid, wash the affected area

with soap and water. If battery

acid gets in your eye, rinse it with

water and seek medical attention

immediately!

• The connection terminals must not

be short-circuited.

Inserting the batteries into the

product (Fig. H)

CAUTION: observe the following

instructions to avoid mechanical

and electrical damage.

Insert the enclosed batteries (18) into the battery

compartment (5q) of the computer (5).

Inserting the batteries

1. Remove the battery compartment cover (5p)

on the back of the computer (5).

2. Carefully insert the 2 x 1.5V batteries (18)

into the battery compartment (5q). The

batteries must be inserted fully into the battery

compartment.

Note: pay attention to the positive/

negative poles of the batteries and ensure

that they are inserted correctly as marked on the

bottom of the battery compartment.

3. Fasten the battery compartment cover onto

the back of the computer.

Replacing the batteries

CAUTION: observe the following

instructions to avoid mechanical

and electrical damage.

When the batteries are flat, replace them as

described in the insertion instructions. Remove

the batteries from the product before inserting

new ones.

Notes on setting up

• Choose a training area of approx. 3 x 1.8m

(L x W).

• Train on a ﬂat, non-slip surface only.

Assembly

The product should be assembled by

two people.

Take care with ﬂoors that are suscepti-

ble to damage! Use a mat or the like, if

necessary, to protect the ﬂoor.

Use the tool provided (16)/(17) to assemble the

product.

Step 1 (Fig. B):

1. Place the slide rail (2) on a solid, level surface

with the screw holes facing upwards.

2. Remove the pre-installed screws (2a) and the

washers (2b) at the end of the slide rail.

3. Slide the seat (3) onto the slide rail from

behind. To do this, direct the gliding carriage

under the seat into the guide on the slide rail.

Note: make sure that the seat is properly

aligned! The widest side of the seat must be

facing forwards.

4. Fasten the stopper (7) onto the back end of

the slide rail with the screws (10).

5. Place the cover cap (8) onto the end of the

slide rail.

Step 2 (Fig. C):

1. Leave the slide rail (2) inverted and fasten the

foot (4), with the screws (2a) and washers

(2b) removed previously.

Note: after assembling the product, adjust the

height with the little wheels (4a) on the left and

right of the foot.

Step 3 (Fig. D):

1. Turn the slide rail (2) 180° and insert the slide

rail into the base frame (1).

2. Fasten the slide rail on the base frame with the

screw (11), the washer (13) and the nut (12).

3. Screw the locking screw (14) and the washer

(15) from above into the threaded hole provid-

ed on the slide rail.

Note: tighten the locking screw so that the prod-

uct remains stable during training.

4. Secure the slide rail (2) with the locking pin (9).

Step 4 (Fig. E):

1. Remove the pre-installed screws (1a) on the

base frame (1).

2. Hold the computer (5) onto the base frame

and connect the two sensor cables of the

computer with those of the base frame.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit IAN 347012 WR 8221 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 5,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit IAN 347012 WR 8221 Manual

Product: