Manual Crivit IAN 334369 1910 (page 8 of 24) (English, German, Dutch, French, Polish)

735646

Zoom out

Zoom in

1/24

CAUTION!

Do not leave children unattended! The product

is not a toy or a climbing apparatus! Make sure

that people, especially children, do not climb on

the product or lean on it.

The product could unbalance and tip over. This

could result in injuries and/or damage.

CAUTION! RISK OF INJURY!

Never assemble or disassemble the product in

strong wind.

• Choose ground that is as solid and level as

possible for erecting the product.

• Sandy surfaces reduce stability. Make sure

the ground underneath is ﬁrm enough to hold

the ground pegs.

• Never hit the ground pegs into the ground

with too much force! If necessary, use a loop

to lengthen the guy lines and reposition the

ground peg.

• Regularly check the integrity of all connection

points and check the tension and the ﬁrmness

of the pegs.

• Assembling the product in the wrong order

could result in damage. Liability of any kind is

excluded.

• Check the product for damage or wear

before each use. Only use the product if it is in

perfect condition!

CAUTION! DANGER OF POISONING

AND DAMAGE TO PROPERTY!

• Do not use ﬁre inside the product and keep it

at a distance from heat sources.

• Familiarise yourself with the ﬁre protection

regulations in the area (e.g. camping ground,

tent site).

• Make sure there is suﬃcient ventilation when

using gas and combustion devices outside of

the product. Otherwise gas can accumulate

inside the product.

Be aware of the inﬂuence of weath-

er and atmospheric conditions

• When choosing a site, consider the local

conditions and how these may change. Is the

site positioned so that it won’t turn into a lake

when it rains? Pay attention to the possibility

of rising rivers or tides.

• Protect the product from strong wind and

storms. Place the product in a spot least sus-

ceptible to wind.

• In strong wind, replace the normal ground

pegs with special storm pegs (not included in

the package contents). Inform yourself about

sensible accessories, such as extra guy lines,

at a specialist store.

• In heavy snow fall or storms, disassemble the

product.

• Remove snow from the product. Otherwise the

product can collapse under the weight.

• Do not tension the product too much, such that

it cannot adapt to changing weather condi-

tions, and therefore becomes damaged.

• Zips are wearing parts and are not covered

by the warranty.

• The polyester material is PU-coated and there-

fore water resistant.

• In the event of moisture or rain, tent fabrics ex-

pand to a varying extent, making it necessary

to retension the guy lines. When the material

becomes tight again as it dries, the guy lines

must be loosened again as this happens.

• Do not use insect spray inside or on the

product.

• Small leaks along the seams can be remedied

with a seam spray (not included in the pack-

age contents) and an impregnation spray can

be used on the tent surface.

Precautionary measures for ﬁre

and ventilation

• Additional ventilation is required when using

gas or other combustion devices.

• Do not place hot appliances near the walls,

roof or door ﬂaps.

• Always mind the safety information for these

appliances.

• Never allow children to play near hot appli-

ances.

• Keep the entrance clear.

• Make sure you are aware of the ﬁre precau-

tions on the premises.

• Make sure the ventilation openings are open

at all times to prevent suﬀocation.

Assembly

The product should be assembled by

two people.

Carry out a test setup before your trip. Make

sure the product and all components are com-

plete and undamaged.

Choosing a site

Choose a site that is as level and clean as possi-

ble. Avoid hollows.

Remove any stones, branches or other sharp

objects to avoid damaging the ground sheet.

Make use of natural wind protection such as

hedges, rocks, etc.

Use ground pegs appropriate for sand (not

included in the package contents), to avoid

unintentional loosening of the tension.

Note: insert the ground pegs into the ground

at a slight angle, in a way that ensures a secure

hold, but does not increase the tension of tent

fabric. Tent fabric and guy points should only be

slightly tensioned, allowing for wind strain.

Make sure the product is not under too much

tension.

Check the tensioning of the tent depending on

the weather.

Note: water condensation generally occurs in

all tents, but especially when there are strong

temperature ﬂuctuations.

After a night in the tent, there will be water con-

densation drops on the inside surface. Conden-

sation is not a sign of leaks.

Good ventilation reduces condensation inside

the tent.

1. Open the storage bag (6) and pull out the

contents.

2. Undo the ties on the rolled product (Fig. B),

remove all components and spread out the

tent (1) ﬂat on the ground.

Note: keep the ties to make it easy to pack the

product away again.

Congratulations!

You have chosen to purchase a high-quality

product. Familiarise yourself with the product

before using it for the first time.

Read the following assembly

instructions and the safety infor-

mation carefully.

Use the product only as described and only

for the given areas of application. Store these

assembly instructions carefully. When passing

the product on to third parties, please also hand

over all accompanying documents.

Package contents (Fig. A)

1 x tent (1)

1 x rain protector with guy lines (2)

2 x ﬁbreglass pole (3)

10 x ground peg (4)

1 x bag for ground pegs (5)

1 x storage bag (6)

1 x assembly instructions

Technical data

Material: polyester/mesh/PE

Water column: 2000mm sealed seams

Bottom: PE – water column: 2000mm

External dimensions:

approx. 125 x 105 x 205cm (W x H x D)

Dimensions when packed:

approx. 56 x 12 x 12cm (L x W x H)

Packed weight: approx. 1.9kg

Date of manufacture (month/year):

05/2020

Category: cat A camping tent (light weight)

Capacity: 2 – tent, designed primarily for use

in mild weather conditions. Not intended for

extreme or mountain conditions.

Intended use

This product serves as a space for sleeping and

sheltering in the outdoors. It is suitable for two

people. The product is not constructed for use in

snow or storms.

The product is intended for private use only and

not for commercial use.

Safety information

PLEASE READ THE ASSEMBLY IN-

STRUCTIONS BEFORE USE!

PLEASE KEEP THE ASSEMBLY IN-

STRUCTIONS IN A SAFE PLACE!

CAUTION! RISK OF INJURY!

Make sure that all components are undamaged

and properly assembled. There is a risk of injury

due to improper assembly.

Damaged parts can aﬀect safety and function of

the product.

GB/IE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit IAN 334369 1910 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit IAN 334369 1910 Manual

Product: