Manual Crivit HG00412 IAN 273647 IAN 273648 (page 12 of 27) (English, German, Dutch, French, Italian)

736848

Zoom out

Zoom in

1/27

10 GB/IE

Keep exits clear. Do not block the exit with

objects.

Make sure you know the ﬁre precaution

arrangements on the site.

§Tent assembly

Inside the carrying bag there is a label with

a QR-code. If the QR code is scanned you

will receive details about how to pitch the

product.

Please ensure that the product is only

assembled by people with the appropriate

skills.

Note: The polyester material of the tent

consists of water-repellent material.

It is possible that during the ﬁrst rainfall

the tent will not be completely watertight.

However, the threads of the tent will contract

when exposed to water so that after a short

time the tent will become watertight.

Erect the product in accordance with the

illustrations A to F.

Illustration A:

1. Place the outer tent 1 ﬂat on the ground.

The holders for the poles 3 4 must be

facing upwards.

2. Push the poles marked in diﬀerent colours

carefully through the holders marked with the

same colour.

Illustration B:

3. Set the tent 1 up and ﬁx the poles to the

rings of the ﬂoor fastenings.

Illustration C:

4. Fix one side of the tent in the ground with

the tent pegs 7. Then take hold of the other

end of the tent and pull it apart in such a

way that the tent is taut.

5. Secure the outer tent 1 by tensioning the

ﬂoor fastenings with the tent pegs 7.

6. Now secure the outer tent 1 with the guy

rope (pre-assemble) 6 and the tent pegs

Illustration D:

7. Open the sunroof (entrance), unroll it and

attach it with the two fasteners.

8. Hang the detachable pockets 12 in inner

tent.

Illustration E:

9. Hang the inner tent 2 and the ﬂoor

tarpaulin 9 into the toggle and click

closures of the outer tent 1 that are

designated for that purpose.

10. Use the hooks 8 at the corners of inner

tent 2 to connect with the outer tent 1.

Illustration F:

11. Stretch the tent until taut and pull all of the

corners and guy ropes 6 until they are

tight. Do not over-tighten the guy ropes

6. If the strength of the wind increases

the attachment point and seam of the tent

might tear. In order to use the entrance as

a sunroof, insert the main support poles 5

into one another and attach the pointed end

of the main support poles 5 into the holes

of the sunroof provided.

12. Secure the supporting poles 5 with the

supporting ropes 10 and the tent pegs 7.

13. Lay out the groundsheet 9 in the tent and

engage the hooks of the groundsheet 9 in

the rings of the tent attachments.

14. The door in the partition of the inner tent 2

can only be opened to one side.

§Taking down the tent

Clean the tent both inside and outside before

you take the tent down. The tent must be

dismantled in the reverse order to the manner

in which it has been erected.

§Packing the tent together

m CAUTION! Please ensure that the tent is

completely dry before you pack it together.

Otherwise this may result in stains and

damage to the fabric.

m CAUTION! The tent pegs 7 and other

individual parts must be packed separately in

the bags provided. Otherwise the tent pegs

7 might damage the tent.

Always fold the outer tent 1 together in

such a way that the ﬂoor of the tent is facing

outwards.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit HG00412 IAN 273647 IAN 273648 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit HG00412 IAN 273647 IAN 273648 Manual

Product: