735706

Crivit BW7170 IAN327353 1904 Manual

12
Zoom out
Zoom in
Previous page
1/32
Next page
12
1. Loosen the axle bolts (21)(22) with two size 5
Allen keys.
2. Pull out the axle bolts and remove the roller.
3. Install the new roller (16) or (17) and secure it
with the axle bolts.
After replacing the wheels:
Do not use the rollers if they pull sideways after
replacing them!
After the first few minutes of skating, make sure
that all screws are still tight and that nothing has
detached or become loose.
Tension the roller once more to make sure that
it is running quietly and that the bearing isn’t
making any noise.
Replacing the ball bearings (Fig. G)
1. Remove the roller (16) or (17) as described in
the section “Replacing the rollers”.
2. Use an Allen key to lever out a bearing (19).
3. Remove the spacer (20) from the roller and
turn it over.
4. Lever out the other bearing with an Allen key.
5. Press in a new bearing. Turn the roller over,
insert the washer and the spacer and then
push in a second new bearing.
6. Secure the roller again as described in the
section “Replacing the rollers”.
Storage and cleaning
We recommend that you clean and dry the item
thoroughly after use.
Remove small stones or other objects that may
have got caught on the rollers. Dry wet or damp
ball bearings with a clean cloth. Grease the
bearings with a suitable bearing lubricant from
the outside to prevent external rust. Always store
the item in a dry place.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Dispose of the products and the packag-
ing in an environmentally friendly manner.
The recycling code is used to identify
various materials for recycling. The code
consists of the recycling symbol – which is
meant to reflect the recycling cycle – and
a number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory guar-
antees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts. Repairs after the warranty
are subject to a charge.
IAN: 327353_1904
Service Great Britain
Tel.: 0800 404 7657
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: deltasport@lidl.ie
GB/IE
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit BW7170 IAN327353 1904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit BW7170 IAN327353 1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info