735706

Crivit BW7170 IAN327353 1904 Manual

11
Zoom out
Zoom in
Previous page
1/32
Next page
11GB/IE
Preventing damage to the item!
• Avoid water, oil, potholes and very rough
surfaces.
Assembly
The item is supplied folded up in transport condi-
tion. Proceed as follows to get it ready for riding:
Unfolding (Fig. A)
1. Pull the safety lever (1) upwards and hold it.
2. Pull the lever (2) upwards, then release the
safety lever (1) and fold the steering col-
umn (3) forwards until it locks into place.
Mounting the grips (Fig. B)
1. Remove the grips (4) from the brackets (5).
2. Lift the cover flap (6).
3. Press the locking knobs (7) down on the grips
and push the grips on both sides into the
T-tube (8) of the steering column. The locking
knobs must snap audibly into place into the
holes (9) provided.
4. Press the cover flap (6) down over the locking
knobs.
Adjusting the height of the steering
column (Fig. C)
The steering column can be adjusted to four
different heights. The item may only be used if
the locking knob is locked in place into one of
the four holes provided and the steering column
is then secured with the quick release fastener!
1. Loosen the quick release (10) on the steering
column.
2. Pull the steering column (3) upwards, until the
locking knob (11) locks into place in one of
the four holes (12).
3. Secure the steering column by locking the
quick release (10).
Note: If the quick release does not fit snugly on
the steering column when tightening, tighten the
knurled screw firmly with the enclosed Allen key.
Make sure that the quick release fastener is
secured before tightening.
Steering head bearing (Fig. F)
The steering head bearing (18) is pre-set
when the item is supplied. If, after a while, the
handlebars have too much play or become too
stiff, get the steering head bearing adjusted by a
specialist dealer or at a bicycle shop.
Putting the item into transport
condition
1. Loosen the quick release (10) on the steering
column and press the locking knob (11)
(Fig. C).
2. Push the steering column (3) all the way down
and lock the quick release (10) (Fig. C).
3. Lift the cover flap (6) (Fig. B).
4. Press the locking knobs (7) of the grips and
pull the grips (4) out of the T-tube (8) (Fig. B).
5. Attach the grips to the brackets (5) (Fig. B).
6. Pull the safety lever (1) upwards and hold it.
Pull the lever (2) upwards, then release the
safety lever (1) (Fig. D).
7. Press the steering column towards the deck
until it locks into place (Fig. D).
Use
Riding, braking, parking (Fig. E)
• Put one leg on the deck (13) and give momen-
tum by regularly pushing off with the other leg.
• Step on the brake plate (14) to brake.
• Swing out the stand (15) to park. The item may
only be parked on a level surface.
Maintenance
Replacing the rollers (16)/(17) (Fig. H)
Important!
Pay attention to the chapter on “Technical data”.
Rollers that have a different diameter, may
alter the riding properties and could possibly
endanger the user. Do not use rollers that cannot
be installed properly. Never use rollers that are
larger than the original rollers on the item.
Rollers wear out. This wear depends on many
factors, such as, for example, the terrain, the size
and weight of the user, the weather conditions,
the material of the rollers and their hardness, etc.
It is necessary to replace them now and then.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit BW7170 IAN327353 1904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit BW7170 IAN327353 1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info