Manual Crivit BW 5911 IAN 327355 1904 (page 12 of 36) (English, German, Dutch, French, Polish)

735707

Zoom out

Zoom in

1/36

Do not use rollers which cannot be easily

installed. Never install rollers larger than the

original rollers on the scooter.

Rollers wear down. This wear depends on many

factors, such as the ground, size and weight of

the user, weather conditions, and the material

and hardness of the rollers. They therefore occa-

sionally need to be replaced.

1. Loosen the axle bolts (17) using two size 5

socket head wrenches.

2. Remove the axle bolts and remove the roller.

3. Install the new roller (18) and secure with the

axle bolts.

After replacing:

Do not use if the roller grinds against the side

after replacing!

Verify all screws are still tight after the first few

minutes of riding and nothing has detached or

loosened.

Retighten the roller to ensure it runs smoothly

and the bearings are silent.

Replacing the ball bearings (Fig. I)

1. Replace the roller (18) as described in section

„Replacing the rollers“.

2. Carefully pry out the respective bearing (20)

using a socket head wrench.

3. Remove the spacer (19) from the roller and

turn it over.

4. Prey out the other bearing using a socket

head wrench.

5. Push in a new bearing. Turn the roller over,

insert the spacer, then push in a second new

bearing.

6. Reattach the roller as described in section

„Replacing the rollers“.

Storage, cleaning

We recommend thoroughly cleaning and drying

the product after use.

Remove small stones or other objects which may

be stuck to the rollers. Dry wet or damp ball

bearings with a clean cloth. Grease the bearings

with suitable bearing grease from the outside to

prevent rust forming on the outside.

Always store the product in a dry location.

Disposal

Dispose of the article and the packaging materi-

als in accordance with current local regulations.

Packaging materials such as foil bags are not

suitable to be given to children. Keep the pack-

aging materials out of the reach of children.

Dispose of the products and the packag-

ing in an environmentally friendly manner.

The recycling code is used to identify

various materials for recycling. The code

consists of the recycling symbol – which is

meant to reflect the recycling cycle – and

a number which identifies the material.

Notes on the guarantee and

service handling

The product was produced with great care and

under constant supervision. You receive a three-

year warranty for this product from the date of

purchase. Please retain your receipt.

The warranty applies only to material and

workmanship and does not apply to misuse or

improper handling. Your statutory rights, espe-

cially the warranty rights, are not affected by this

warranty.

With regard to complaints, please contact the

following service hotline or contact us by e-mail.

Our service employees will advise as to the

subsequent procedure as quickly as possible.

We will be personally available to discuss the

situation with you.

Any repairs under the warranty, statutory guar-

antees or through goodwill do not extend the

warranty period. This also applies to replaced

and repaired parts. Repairs after the warranty

are subject to a charge.

IAN: 327355_1904

Service Great Britain

Tel.: 0800 404 7657

E-Mail: deltasport@lidl.co.uk

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: deltasport@lidl.ie

GB/IE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit BW 5911 IAN 327355 1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit BW 5911 IAN 327355 1904 Manual

Product: