735707

Crivit BW 5911 IAN 327355 1904 Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
11GB/IE
Prevent property damage!
• Avoid water, oil, potholes and very rough
surfaces.
Assembly
The product is supplied folded for transport.
Proceed as follows to set it up for use:
Unfolding (Fig. A)
1. Pull the clamping lever (1) up and hold in
place.
2. Pull the lever (2) up, then release the clamp-
ing lever (1) and unfold the steering post (3)
until it locks into place.
Handle assembly (Fig. B)
1. Remove the handles (4) from the holders (5).
2. Lift the cover flap (6).
3. Push in the locking buttons (7) on the handles
and slide the handles into both ends of the
T-bar (8) on the steering post. You must hear
the locking buttons lock into the designated
holes (9).
4. Push the cover flap over the locking buttons.
Adjusting the steering post (Fig. C)
The steering post can be adjusted to four differ-
ent levels. Only use the product with the locking
button locked into one of the four designated
holes and after securing the steering post with
the quick-release connector!
1. Release the quick-release connector (10) on
the steering post.
2. Pull up on the steering post (3) until the
locking button (11) latches into one of the four
holes (12).
3. Secure the steering post by locking the
quick-release connector.
Note: If the quick release is not tight against the
bar when closed, tighten the knurled screw using
the included socket head wrench.
Verify the quick release is locked before tight-
ening.
Steering head bearing (Fig. D)
On product delivery the steering head bear-
ing (13) is preset. If the handlebar has too much
play after some time or becomes too tight, have
the steering head bearing adjusted by a speciali-
ty retailer or a bicycle shop.
Brake
Adjusting the brake
ATTENTION!
The brake must be adjusted so the back
wheel moves freely when the brake
lever is released and locks when engag-
ing the brake lever.
Turn the adjusting and locking nut (21) to the left
to reduce the braking force, turn the adjusting
and locking nut to the right to increase the brak-
ing force (Fig. E).
Readying the product
for transport
1. Release the quick-release lever (10) on
the steering post and push in the locking
button (11) (Fig. C).
2. Push the steering post (3) in all the way and
tighten the quick-release lever (10) (Fig. C).
3. Lift the cover flap (6) (Fig. B).
4. Push in the locking buttons (7) on the handles
and pull the handles (4) out of the T-bar (8)
(Fig. B).
5. Secure the handles in the holders (5) (Fig. B).
6. Pull the clamping lever (1) up and hold in
place (Fig. F). Pull the lever (2) up, then
release the clamping lever (1).
7. Move the steering post toward the deck until
it locks into place (Fig. F).
Use
Riding, braking, parking (Fig. G)
• Place one leg on the deck (14) and put into
motion by evenly pushing off with the oth-
er leg.
• To brake, step on the brake plate (15) or pull
the brake lever (Fig. E).
• Swing out the stand (16) to park.
Only park the scooter on level surfaces.
Maintenance
Replacing the rollers (Fig. H)
Important!
Please refer to chapter “Technical Data”. Rollers
with a different diameter can alter the riding
properties and possibly endanger the user.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit BW 5911 IAN 327355 1904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit BW 5911 IAN 327355 1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info