732011
18
Zoom out
Zoom in
Previous page
1/72
Next page
-
33
-
Maximum alitude
Press SEL to select the sub-feature (HIGH).
Press SET to show the current altitude/maximum altitude or
Temperature/time/diagram/maximum altitude.
Press and hold SET to reset the maximum altitude to the current altitude.
Minimum altitude
Press SEL to select the sub-feature (LOW). Press SET to show the current
altitude/minimum altitude or temperature/time/diagram/minimum altitude.
Press and hold SET to reset the minimum altitude to the current altitude.
Total altitude gain
Press SEL to select the sub-feature (UP). Press SET to show the current altitude/total
altitude gain or
temperature/time/diagram/total
altitude gain. Press and hold SET to reset
the total altitude gain.
Total altitude loss
Press SEL to select the sub-feature (DOWN). Press SET to show the current
altitude/total altitude loss or
temperature/time/diagram/total altitude
loss. Press and hold SET to reset the total
altitude loss.
-
34
-
Number of hills
Press SEL to select the sub-feature (HILL). Press SET to show the current altitude/hills
or temperature/time/diagram/hills.
Press and hold SET to reset the number of
hills.
Temperature
The temperature measured by the watch in measured within the case of the watch.
Please note that your body temperature can influence the reading.
To perform a temperature reading the watch should be removed from your arm and
then exposed to the outside temperature for 15 to 30 minutes.
Avoid placing the watch in direct sunlight.
Memory
Press SEL to select the sub-feature (RECORD). The values for the last 8 hours can be
shown on the display. Repeatedly press SET to show each value.
Press and hold SET to reset the memory.
Exit Memory mode by pressing MODE.
Troubleshooting
Incorrect compass reading
Incorrect calibration or external influences (change of location).
Calibrate the compass as described in this manual.
Error message " ERROR " when using the compass feature.
External magnetic influences (for example: metal objects, electronic or electrical
devices, computers, transformers or power lines). Move to a different location and
repeat calibration.
Display becomes weaker or shows incorrect values
Batteries weak or dirty/corroded contacts.
Replace the batteries and clean the contacts using a dry, lint-free cloth.
Black display
Outside temperature too high; possibly cause by prolonged and direct exposure to
sunlight.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit 1-LD4657 - IAN 285498 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit 1-LD4657 - IAN 285498 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info