732011

Crivit 1-LD4657 - IAN 285498 Manual

15
Zoom out
Zoom in
Previous page
1/72
Next page
-
27
-
Alarm (ALARM)
Press SEL to select the alarm sub-feature. Press and hold SET for 3
seconds to enter setting mode. „HOLD TO SET“ will appear
on the display followed by „A1" and a blinking indicator „ - -
“. Press SEL to activate the alarm „
ON
“ or to deactivate the alarm
„ - - “. If the alarm is activated, the alarm symbol will
appear on the display. Confirm your setting by pressing SET.
The minutes will blink on the display. Press SEL to set the minutes and press SET to
confirm your setting. Set the hours in the same way.
The month and day can now also be set if necessary.
Press SET to select one of the 5 available alarms A1-A5 and set the alarm as
described.
If neither the month nor the day is set, the alarm will sound
daily.
If only the month is set, the alarm will sound on every day of
the set month.
If only the day is set, the alarm will sound every month on the
set day.
If both the month and the day are set, the alarm will sound only
on the set date.
The hourly chime indicator will now blink on the display „CHIME“. Press SEL
to activate or deactivate the hourly chime (ON, OFF) and confirm your setting
by pressing SET.
Bei aktiviertem Stundensignal erscheint das Glockensymbol
und es ertönt zu jeder vollen Stunde ein Signalton.
-
28
-
Exit setting mode by pressing MODE.
Press SET, SEL or MODE when the alarm sounds to stop the alarm.
Snooze feature
If no button is pressed when the alarm sounds, the alarm will sound again after 30
seconds and the symbol will appear on the display. The alarm will now stop for
approximately 90 seconds and then sound again. This process can be repeated 4
times.
Timer (TIMER),(max. 23:59:00)
Press SEL to select the sub-feature. Press and hold SET for 3 seconds to enter setting
mode. „HOLD TO SET“ will appear on the display followed by the minutes of
the timer time. Press SEL to set the minutes and confirm your setting by pressing SET.
Set the hours in the same way. The additional setting for the timer follows. Press SEL
to select the desired mode:
Cd r
After the timer reaches 0:00 it will count the set time
again.
Cd U
After the time reaches 0:00 it will count forward
Cd S
After reaching 0:00 the timer will stop
Exit setting mode by pressing MODE.
Press SET to start or stop the timer.
After the set time is counted a beep will sound.
Press and hold SET to reset the timer.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit 1-LD4657 - IAN 285498 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit 1-LD4657 - IAN 285498 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info