8
INTRODUCTION
Congratulations with the purchase if the In/Out Thermometer with wireless sensor and radio controlled clock.
The basic package comes with a main unit (the temperature/clock station) and a remote unit (the thermo
sensor).
The main unit has large displays for time/date, indoors temperature and humidity, outdoors temperature and
humidity as received from the remote unit. The main unit can receive data from up to 3 remote units.
The main unit has a memory for maximum and minimum reached temperatures and humidity of different sites.
The remote units have a range up to 30 meters, this range can be influenced by several factors (concrete walls,
electric wires, other sending devices, etc.)
The sensors are weatherproof and can be used outdoors, but should not be submerged into water or hung in a
place where rain can reach the unit.
The clock/calendar function is radio controlled and the unit has a 2 minute crescendo weekly and daily alarm.
The clock is synchronised with the atom clock in Frankfurt Germany, this clock has a range of 1.500 km and your
clock will receive the time signal 12 to 24 times a day and will correct, if necessary. When you first operate your
clock, it can take up to 60 minutes before the radio
signal is received and the correct time is set.
When you put the main unit and the remote unit next to each other, you will notice a minimal difference in
temperature. This is caused by the software used and the insulation of the outdoors sensor, this sensor is
calibrated on the average outdoors temperature, whereas the main unit is calibrated on the average indoors
temperature.
This is no defect in the units
At temperatures below freezing point the operation can be distorted, this is caused because the batteries cannot
deliver the power needed to operate the unit correctly.
You can avoid this by using branded batteries and change them just before the winter starts.
