Manual Cresta BPM220 (page 16 of 30) (English, German, Dutch, French)

689986

Zoom out

Zoom in

1/30

14 15

Guidance and manufacturer’s declaration – electromagnetic immunity

The Model Series Electronic Blood Pressure Monitor is intended for

use in the electromagnetic environment specified below. The customer

or the user of the Model BPM220 Series Electronic Blood Pressure Monitor

should assure that it is used in such an environment.

BPM220

Immunity test

Electrostatic

discharge

(ESD)IEC

61000-4-2

IEC 60601

test level

±8 kV contact

±2 kV, ±4 kV,

±8 kV, ±15KV

air

Compliance

level

±8 kV contact

±2 kV, ±4 kV,

±8 kV, ±15 KV

air

Electromagnetic environment-

guidance

Floors should be wood,

concrete or ceramic tile. If

floors are covered with

synthetic material, the relative

humidity should be at least

30 %.

Power

frequency

(50/60 Hz)

magnetic

field IEC

61000-4-8

30 A/m,

50/60Hz

30 A/m,

50/60Hz

Power frequency magnetic

fields should be at levels

characteristic of a typical

location in a typical

commercial

or hospital environment.

NOTE U is the a.c. mains voltage prior to application of the test level

Guidance and manufacturer’s declaration – electromagnetic immunity

The Model Series Electronic Blood Pressure Monitor is intended for

use in the electromagnetic environment specified below. The customer

or the user of the Model BPM220 Series Electronic Blood Pressure Monitor

should assure that it is used in such an environment.

BPM220

Immunity

test

IEC 60601

test level

Compliance

level

Electromagnetic environment -

guidance

Conducted

RF IEC

61000-4-6

3 Vrms150

kHz to 80

MHz 6 Vrms

150 kHz to 80

MHZ outside

ISM bandsa

N/A

Portable and mobile RF

communications equipment

should be used no closer to any

part of the Model BPM220 Series

Electronic Blood Pressure Monitor,

including cables, than the

recommended separation

distance calculated from the

equation applicable to the

frequency of the transmitter.

Recommended separation distance

5.3

Radiated RF

IEC 61000-4-3

10 V/m

80 MHz to

2.7 GHz

10 V/m

5.3

800MHz to 2.7GHz

where P is the maximum output

power rating of the transmitter in

watts (W) according to the

transmitter manufacturer and d is

the recommended separation

distance in metres(m).

Field strengths from fixed RF

transmitters, as determined by an

electromagnetic site survey,

should be less than the

compliance level in each

frequency range

Interference may occur in the

vicinity of equipment marked with

the following symbol:

80MHz to 800MHz

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reflection from structures,

objects and people.

a The ISM (industrial, scientific and medical) bands between 0,15 MHz and

80 MHz are 6,765 MHz to 6,795 MHz; 13,553 MHz to 13,567 MHz; 26,957 MHz to

27,283 MHz; and 40,66 MHz to 40,70 MHz. The amateur radio bands between

0,15 MHz and 80 MHz are 1,8 MHz to 2,0 MHz, 3,5 MHz to 4,0 MHz, 5,3 MHz to

5,4 MHz, 7 MHz to 7,3 MHz, 10,1 MHz to 10,15 MHz, 14 MHz to 14,2 MHz, 18,07

MHz to 18,17 MHZ, 21,0 MHz to 21,4 MHz, 24,89 MHz to 24,99 MHz, 28,0 MHz to

29,7 MHz and 50,0 MHz to 54,0 MHz.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cresta BPM220 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cresta BPM220 Manual

Product: