460569
9
Zoom out
Zoom in
Previous page
1/28
Next page
POWER UP SYNCHRONIZATION
The base unit will search for the RF signal from the rain collector for 6 minutes after reset or after batteries are
inserted. When the temperature display on the main unit shows the OUT temperature, synchronization between
the base unit and remote unit is complete.
The top, left of the base unit display will show the icon to indicate signal transmission. If the OUT
temperature does not show on the display within 6 minutes after reset, press the RE-SYNC button and the main
unit will search for the RF signal for another 6 minutes. If the base unit still fails to show the out temperature,
refer to the LOSING SYNCHRONIZATION section.
Locating the Base Unit and Remote Sensor
•Choose a suitable place for the base unit and remote outdoor sensor, within the transmission distance.
•Place the base unit near a window, but away from direct sunlight or sources of heat or air conditioning to 
 ensure accurate temperature readings.
•The location you choose is critical for maximizing the transmission range. The remote sensor is designed to 
 transmit unimpeded 80 to 100 ft. Transmitting through walls, metal doors and metal framed windows may 
 reduce the transmission range. To optimize the transmission distance, the remote unit should be positioned in 
 a location that minimizes these obstructions. Other interference from electrical sources such as home security 
 systems, wireless doorbells and wireless home entertainment equipment may interrupt the transmission signal 
 temporarily.
Notes:
•The outdoor rain collector must be placed on a level, horizontal surface for accurate rainfall measurement.
•Warning: Ice will affect the accuracy of rainfall readings and will damage the internal mechanism of the rain
collector. In temperatures below freezing the collector can remain outdoors for temperature data transmission,
but the unit must be placed in a protected area to prevent ice damage.
INDOOR AND OUTDOOR TEMPERATURE
•The indoor temperature is shown after activation until the first outdoor temperature signal is received. The 
 display will then change to the outdoor temperature reading.
•Press the IN-OUT TEMP button to toggle between indoor and outdoor temperature.
•To activate Auto Scroll mode, press and hold the IN-OUT TEMP button for 3-4 seconds. Double curved 
 arrows will show at the top of the LCD display and the unit will automatically toggle between indoor and 
 outdoor temperature. Press and hold the IN-OUT TEMP button for 3-4 seconds to de-activate Auto-Scroll 
 mode.
•The temperature trend arrow which is located directly above the temperature reading will indicate the trend 
 of indoor and outdoor temperatures during the last three minutes.
TEMPERATURE ALERT
When either the indoor or outdoor temperature exceeds the upper or lower pre-set limits, the alarm will sound
for five seconds. It will be accompanied by a flashing alert icon and flashing arrow to show that the temperature
has reached the upper or lower limit. The audible alert will sound for five seconds every minute.
Setting the Temperature Alert:
•When setting the alert temperatures, the display will change in increments of 1.8°F or 1.0°C.
•Press and hold the ALERT button until the alert icon, up arrow and IN icon are shown on the display and the 
 alert temperature is flashing
•Press + or - to set the desired indoor alert temperature upper limit
•Press ALERT and the down arrow will be displayed. Press + or - to set the desired indoor alert temperature 
 lower limit
P.9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cresta 9321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cresta 9321 in the language / languages: Dutch as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info