618072
6
Zoom out
Zoom in
Previous page
1/23
Next page
cressi.com
AUTOMATIC
RETURN
BEEP
AFTER 2’’
DIVE COMPUTER LOCK
SET TIME
ALARM SET
ACTIVATING THE DIVE COMPUTER
The dive computer can be accessed in two ways. The first is by pressing and holding the MODE button so
that the DIVE indication is displayed. Immediately after the MODE button is released the PRE DIVE screen
will appear. The second way is to scroll through the menus with the UP or DOWN button until ENTR DIVE
appears and then press the MODE button. The DIVE indication will appear first and then the PRE DIVE
screen will appear.
If the dive computer is locked the LOCK indication will appear. In this case, unlock the computer before
accessing it (see paragraph «Menu Set Lock»).
SET TIME MENU
Adjusting the time, date and alarm.
Press the UP button until the display shows the SET TIME mode, then press the Mode button. The time
digits will begin to flash. By pressing the UP or DOWN button the indicators of the minutes, second time
zone, alarm, year, month, day, and the setting for the 12/24 hour display mode will flash. Scroll up to the
relevant item and press the Mode button again. The display will show only the highlighted item flashing.
Change it by pressing the UP or DOWN button. Confirm the choice by pressing and holding the Mode
button for a few seconds until hearing a beep to confirm the exit from the menu. By continuing to press and
hold the MODE button the user returns to the main menu (after another beep). Alternatively, the computer
will modify the settings automatically with a beep and then the user is taken back to the main screen.
NOTE: Always check that the date and time are set correctly so as to have useful entries in the
computer's logbook.
Setting the alarm.
To set the alarm type from the Set Time menu having reached the alarm time continue pressing the Up
button until the letters «AL» flash. At this point, press the MODE button. The alarm mode currently set will
appear. Press the UP or DOWN button to change modes. The alarm modes are the following:
Daily: To make the alarm sound on a daily basis.
Once: To make the alarm sound only once.
Off: The alarm is off.
SET LOCK MENU: LOCKING THE DIVE COMPUTER
Scroll through the menus with the UP or DOWN button. Once at the SET LOCK menu press MODE.
The text OFF will appear. Press the UP or DOWN button. The text ON will appear. Confirm by
pressing the Mode button for a few seconds until hearing a beep to confirm the exit from the menu.
Alternatively, the computer will change the settings automatically with a beep and then return to
the main screen. The text LOCK will always be visible in the upper left regardless of which menu is
set.
WARNING: When the dive computer is locked, it is recommended to unlock it before each dive. In
fact, for security reasons the computer will remain locked even during a dive and it may only be
unlocked by returning to the surface and lifting it out of the water. Once unlocked it will not
consider the time spent diving up to that point.
It is therefore recommended not to proceed with a dive immediately after unlocking it but to wait 24
hours for complete desaturation.
AFTER 2’’
AFTER 4’’
ACCESS TO THE DIVE COMPUTER
TIME DISPLAY
TIME DISPLAY
LONG
1:
2:
6
INDEX
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi NEWTON at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi NEWTON in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info