618072
5
Zoom out
Zoom in
Previous page
1/23
Next page
cressi.com
COMPUTER CONTROL
OPERATION OF NEWTON COMPUTER-WATCH
CLOCK
Newton has a very intuitive display, designed to "support" the diver during any operation. It has four
buttons around it, two on the upper side (LIGHT and MODE) and two on the lower side (DOWN and UP),
with which the instrument is controlled.
BUTTONS
Each button has a specific function which is described below.
LIGHT Button: This button is used to illuminate the display and for the shutdown of the device.
MODE Button: This button is used to enter the menus. The button can be pressed briefly or it can be
pressed and held for a moment to achieve different effects. Within the clock function, press and hold the
button (4 sec.) to access the dive computer.
UP button: This button is used to move up through menus and to increase values.
DOWN button: This button is used to move down through menus and to decrease values.
The clock's standard screen shows the time in the center of the display. By pressing the UP and DOWN
buttons the screen displays the following additional indications and information:
- SEC: Indicates that the information displayed under the time are the seconds.
- DATE: Indicates that the information displayed under the time is the date (day and month).
- T2: Indicates that the information displayed under the time is the second time zone.
- AL: Indicates that the information displayed under the time is the alarm time currently set.
- CHRO: Indicates that the chronograph can be accessed through this menu.
- ENTR DIVE: Indicates that the dive computer can be accessed through this menu.
- SET TIME: Indicates that the time, second time zone, alarm time, date and 12/24 hour display mode can
be adjusted through this menu.
- SET LOCK: Indicates that the lock function of the dive computer can be accessed through this menu.
CHRONOGRAPH
To access the chronograph, press the UP or DOWN buttons until the CHRO indication appears at the top
right of the screen. Press the MODE button. The CHRO indication will disappear. To activate the
chronograph, press the UP button.
Access the split times by pressing the DOWN button (the upper left part of the screen will display the
indication L1, 2,...20 while the time of the chronograph will display the relevant split time for three seconds
before showing the count again). It is possible to store up to 20 split times. Stop the count by pressing the
UP button (the stop indication will be displayed at the top left of the screen). Split times can be accessed
by pressing the DOWN button. To reset the function press and hold the UP button.
SHUTDOWN OF THE DEVICE
In order to reduce the consumption of the battery when the device is not in use, Newton can be switched
off by pressing the LIGHT button for 5 seconds. The shutdown will cause the loss of the TIME and DATE,
and will be possible only after the no-fly time.
NEWTON WATCH DISPLAY
NEWTON WATCH BUTTONS
CHRONO
TIME DISPLAY
LOCKED DIVE COMPUTER
TIME DISPLAY
TIME DISPLAY + SECONDS
TIME DISPLAY + ALARM ON
TIME DISPLAY + CHRONO READY CHRONO
CHRONO ON
TIME DISPLAY + ALARM OFF
TIME DISPLAY + DATE
DUAL TIME
CHRONO SPLIT TIME
3’’ BEFORE CHRONO SPLIT TIME
CHRONO RESET
LONG
CHRONO STOP CHRONO SPLIT TIME 1 CHRONO SPLIT TIME 2...20
UP
DOWN
MODE
LIGHT
UP button: This button is used to
move up through menus and to
increase values.
Mode Button: This button is used to
enter the menus. The button can be
pressed briefly or it can be pressed
and held for a moment to achieve
different effects. Within the clock
function, press and hold the button (4
sec.) to access the dive computer.
DOWN button: This button is
used to move down through
menus and to decrease values.
LIGHT Button: This button is used
to illuminate the display and for
the shutdown of the device.
5
INDEX
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi NEWTON at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi NEWTON in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info