618062
32
Zoom out
Zoom in
Previous page
1/42
Next page
189
quent dive’s simulation, with de-saturation in progress.
Should the simulation be carried out with Nitrox mixtures,
refer to all information seen in the chapters dealing with Nitrox
mixtures; it is possible to simulate the mixture change as well
as in reality, by depressing button B for more than 5 seconds
(picture 37).
If you want to reset the simulator, depress buttons A+C one
after the other during the simulation itself.
NOTE: The simulation is carried out with the dive para-
meters set in (DIVE) function (see chapter 2.3.).
NOTE: The simulation is carried out at a speed six times
greater than the actual one. This equates to 10 seconds
on the simulator or the same as one real diving minute,
while the variations of depth are each m 2 (ft. 6).
Related topics:
2.3. - Parameters setting.
• 2.3.2. - Dive planning
3.1. - AIR DIVE.
3.4. - Curve dive.
3.5. - Decompression dive.
3.2. - NITROX MIXTURES DIVE.
3.3.4. - CNS toxicity display.
3.3.5. - PO2 alarms.
4.1.1. - Surface interval.
4.2.2. - Surface interval dive simulator.
4.2.2. – Surface interval dive simulator.
Should the computer contain residual nitrogen (de-saturation
time is still in progress), Archimedes II allows modifying of the
surface interval in order to simulate a subsequent dive. As
noted in the previous chapter, the simulator program is ente-
red by repeatedly depressing button B (Mode), until the
( ) icon appears on the UFDS display (picture 35). The
display mode instructs you to set a new surface interval, by
means of UFDS display icons: by depressing button C ( ),
the surface interval will increase, while by depressing button
A ( ), the chosen value is confirmed. When this has been
done, Archimedes II will show the simulation display (pictu-
re.36), as seen in the previous chapter, allowing you to simu-
late a subsequent dive.
Related topics:
2.3. - Parameters setting.
• 2.3.2. - Dive planning
3.1. - AIR DIVE.
3.4. - Curve dive.
3.5. - Decompression dive.
3.2. - NITROX MIXTURES DIVE.
3.3.4. - CNS toxicity display.
3.3.5. - PO2 alarms.
4.1.1. - Surface interval.
4.2.2. - Surface interval dive simulator.
5. – CARE AND MAINTENANCE.
Archimedes II has been designed to operate in extreme con-
ditions with extensive underwater use. You should remember
that it is a precision instrument deserving appropriate care.
Please avoid any violent shock, protect it from extreme heat
sources, always wash it in fresh water after using, dry it care-
fully, do not store it wet, and avoid contact with heavy equip-
ment, like diving cylinders.
ENGLISH
i
Manuale ARCHIMEDE II 2008:Manuale 6 26-06-2008 8:26 Pagina 189
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi Archimede II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi Archimede II in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info