618062
16
Zoom out
Zoom in
Previous page
1/42
Next page
173
3. - program.
Archimedes II computer offers two computing pro-
grams; for air ( program) and for nitrox mixtures or
EAN (Enriched Air Nitrox) dives. Archimedes II allows for use
with up to two different nitrox mixtures during the same dive.
NOTE: Archimedes II computer is set at the factory on
program, with the primary mixtures (Mix 1) O2
value on 21% and PO2 on 1.4. The second mixture (Mix
2) is set at the factory off. Each manual variation of the
manufacturer’s values relating to Air program will start
Archimedes II Nitrox computation program.
3.1. - AIR DIVE.
Archimedes II computer starts automatically the "Dive" pro-
gram at a depth superior to (ft. 5). During a curve dive the
display will show the following information (picture 10):
1 current depth value, in meters (m) or feet (ft.)
2 no decompression time still available is shown by the
“NDL” - (No Decompression Limit) icon
3 maximum depth reached during the dive
displayed in meters (m) or in feet (ft.), shown by the
“MAX” icon
4 time spent diving, shown by the "DIVE T" icon
indicator of segmented surfacing speed
6 graph of nitrogen amount absorbed during the dive
7 graph representing CNS O2 toxicity level (see chapter
3.3.4)
8 Automatic indicator of altitude level
9 Icon of maximum depth alarm (if switched ON – see 2.5.1)
10 indicator of Nitrox mixture(s) dive
11 MIX1 or MIX2 icons identifies which Nitrox mixture is being
considered by the computer to make its computations
12 ( ) and ( ) icons, that is “Info” (button A) and back-illu-
mination (button C).
Further important information are obtained by keeping pres-
sed button A ( ) during the dive, that is (picture 11):
1 current PO2;
2 oxygen percentage of the selected mixture (Air if FO2=21%);
3 maximum depth reached during the dive, in meters (m) or
feet (ft.);
4 current temperature, expressed in °C or °F
The UFDS display show ( ).
NOTE: When the computer is used for air dives, it is not
necessary to carry out any FO2 change or setting before
the following dive.
During your diving activity, light condition may not allow easy
reading of the display, therefore, it is possible to switch on its
back-illumination by depressing button C ( ). The display’s
back-illumination will last about 5 seconds and may be repea-
ted any time you want. The battery consumption is minimal
when the back-illumination is activated.
Related topics:
• 2.3. – Dive parameters setting
• 3.4.1. Ascent rate.
3.3.3. - Mixture changing by diving
3.3.4 - CNS toxicity display.
3.3.5. - PO2 alarm.
ENGLISH
5
Manuale ARCHIMEDE II 2008:Manuale 6 26-06-2008 8:26 Pagina 173
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi Archimede II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi Archimede II in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info