498215
10
Zoom out
Zoom in
Previous page
1/24
Next page
10
The Controls - Excel Sensor Dry Models
Selecting a
programme
Programme
options
Selecting the
required heat
switch settings
(i) Sensor Drying
(Dry now)
(ii) Delayed Start
Sensor Drying
(Dry Later)
Heat Switch (OUT low heat, IN high heat) Active / Empty Water Light
Turn the knob in either direction to select the required programme,
until the required selection appears in line with the indicator.
NOTE: The timer knob does NOT move during the programme.
Sensor Drying with delayed start (Dry Later) selected in steps of 1
hour (The knob remains on the Selected position during the
delay and drying sections of the programme, it does not count
down).
S-Sensor Drying (Dry Now).
Timed drying (30 minutes) for small loads.
Speedy Iron programme.
To select HIGH heat (Cottons), the Heat Switch must be IN.
To select LOW heat (Acrylics and Synthetics), the Heat Switch must
be OUT. See section, "Guide to Drying Times".
The Sensor Drying programme will automatically dry most loads to the
dry condition. This eliminates the need to guess the drying times and
saves energy. To select Sensor, turn the knob to position ‘S’. When
the load is dry, the dryer will automatically complete the 10-minute cool
tumble phase.
NOTE:
Small loads (less than 1kg) must be dried using Timed drying
programme.
When using a Delay Start Sensor Drying programme, select the
programme with the required number of hours delay. The time set is
the delay before the drying programme is required to start (Maximum
8 hours).
NOTE:
The drying programme will start when the delay time selected
has elapsed, but the knob will not move from the position you
set.
Ensure that the door is closed and the start button has been
pressed after setting the required delay start programme.
If you open the door after pressing the Start button, ie. to add
articles, remember to press the Start button again.
Start Switch
THE START BUTTON MUST BE PRESSED TO START ALL
PROGRAMMES INCLUDING A DELAYED START (DRY LATER)
PROGRAMME (Green Light will illuminate).
10


Need help? Post your question in this forum.

Forumrules
1

Forum

creda-t632cw

Reset search

  • dryer will not power up no voltage to the switch.. Could it be start relay failure? Door interlock seems to work O.K

    any suggestions? Submitted on 1-1-2021 at 12:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creda T632CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creda T632CW in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info