789612
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
ENGLISH
SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
When using any electrical appliance, basic safety precautions should always be observed.
Read this entire manual carefully before beginning installation. Save this instructions.
Use only original replacement parts.
To reduce the risk of personal injury, attach the fan directly to the support structure of
the building according to these instructions, and use only the hardware supplied.
To avoid possible electrical shock, before installing your fan, disconnect the power by
turning off the circuit breakers to the outlet box and associated wall switch location. If
you cannot lock the circuit breakers in the off position, securely fasten a prominent warn-
ing device, such as a tag, to the service panel.
All wiring must be in accordance with national and local electrical codes and ANSI/NFPA
70. If you are unfamiliar with wiring, use a qualied electrician.
To reduce the risk of personal injury, do not bend the blade attachment system when
installing, balancing, or cleaning the fan.
Never insert foreign objects between rotating fan blades.
To reduce the risk of re, electrical shock, or motor damage, do not use a solid-state
speed control with this fan. Use only original speed controls.
This appliance can be used by children aged from 8 years old and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children unless they are older than
8 and supervised. Close supervision is necessary when any appliance is used by or near
children.
NOTE: The important safety precautions and instructions appearing in the manual are not
meant to cover all possible conditions and situations that may occur. It must be understood
that common sense and caution are necessary factors in the installation and operation of
this fan.
Mark the correct position of the holes and x the ceiling bracket using the screws with
metal anchor or screws and washers suitable for the type of ceiling chosen.
Check the correct installation of the bracket before hanging the fan. This plate must support
the full weight of the fan.
To prevent personal injury and damage,
ensure that the hanging location allows
the blades a clearance of 2.3 m from the
oor and 76 cm from any wall or obstruc-
tion.
Be sure the outlet box is securely at-
tached to the building structure and can
support the full weight of the fan.
INSTALLATION PREPARATION
76 cm
from wall
or nearest
obstruction
2.3 m from blades to oor
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Windlight Curve DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Windlight Curve DC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info