789615
11
Zoom out
Zoom in
Previous page
1/64
Next page
11
ENGLISH
Check the correct operation of the ceiling fan, checking that there are no strange move-
ments or misalignments in any part of the fan.
In the event that any type of hum / vibration can be seen, you can proceed to adjust the
blades with the anti-roll kit.
The anti-roll kit has self-adhesive weights and u-shaped clips.
Turn off the ceiling fan.
You can put the clip in the center of any blade and check if the vibration decreases.
Turn on the fan and check. If there are no changes, turn off the fan and add another.
Install the bulb (not included).
Attach the lampshade to the motor by inserting the glass neck into the light xture, keeping
two spring clips inside the glass neck. Pull the glass shade towards the third spring clip.
Push the third clip to t inside the glass and push the glass towards the mounter.
Assemble the decorative keychain and extension chains from the hardware bag to the fan
pull chains by inserting the end of the chain into the chain link. Conrm that the chains are
secure by pulling lightly on both chains on the coupling.
Align the holes in the blade bracket with the holes in the blades and motor body and screw
them into place, but do not tighten the screws until they are all in place and screwed in.
BLADE ASSEMBLY
INSTALLING THE LIGHT KIT
12
12
Screw
Blade
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Wind Easy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Wind Easy in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info