Manual Create Wind Ball (page 9 of 64) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

789617

Zoom out

Zoom in

1/64

ENGLISH

MOUNTING AND HANGING OF THE FAN

Cabling

Rosette

Ball coupling

Trim

Cap screw

Lock pin

Adapter

Fixing screw

• If you want to extend the hanging length of your fan, remove the hanger bar ball and use

the additional extension bar (included). (If you want to use the suspension bar, follow the

instructions below).

• To remove the ball from the hanger bar, loosen the set screw and remove the pins. Lower

the ball and remove the locking pin. Take the ball out of the hanger bar and insert it into the

longer hanger bar (the top of the bar has a hole for the xing screw, use it to x the bar).

• Insert the locking pin into the end of the suspension rod and raise the ball.

• Make sure the locking pin is aligned with the slots inside the ball and secure the set screw.

Tip: To make it easier to insert the wires into the bar, put some insulating tape around the

wires. This will help keep them together as you insert them into the bar.

• Loosen the mounting bolts and washer on top of the motor housing. Remove the bar pins (if

you haven't already). Insert the rosette through the bar.

• Thread the cables through the bar and pull excess cables from the top of the bar to tighten.

• Place the bar inside the motor housing and insert the pins previously removed. Fit the set

screws and washers.

• Lower the canopy onto the motor housing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Create Wind Ball in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4.1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Create Wind Ball Manual

Product: