789617
8
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISH
8
Choose the suspension bar that best suits your situation.
Remove the bolt from the bar by removing the pin and thread the canopy (roof trim) and
motor canopy through the hanger bar. Next, route the fan motor wires through the inside of
the hanger bar. Fit the hanger bar to the engine and insert the bolt and cotter pin.
PREPARATION OF THE FAN LOCATION
20°20°
Medium
Traditional
mounting
style
The traditional mount hangs from the
ceiling with a bar.
Medium
Angle mount style
Angle mounting is recommended on sloped
or vaulted ceilings.
The outlet box and beam must be securely mounted and capable of safely supporting at
least the weight of the fan.
Do not x the mounting bracket directly on ceilings less than 10mm to avoid the risk of the
screw loosening and coming out.
INSTALLING THE MOUNTING BRACKET
Wood roof
Attach mounting bracket with wood screws
and washers at ceiling joints.
Concrete ceiling
Drill the holes with an 8mm drill bit,
according to the length of the expansion
bolts. Next, x the mounting bracket to the
ceiling with the expansion screws.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Create Wind Ball at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Create Wind Ball in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info