Manual Cramer 82ZT132 (page 15 of 201) (All languages)

818975

Zoom out

Zoom in

1/201

• For long-term storage, please make sure the storage

temperature is -20°C - 45°C within one month, and 0°C -

35°C between two and twelve months.

• The working environment of the battery pack is -20°C

-55°C for discharge, and 0°C~55°C for charge.

7.8 SERVICE

IMPORTANT

Wait for all movement to stop before adjusting, cleaning or

repairing. Repairs or maintenance requiring power should

be performed by trained maintenance personnel only. Read

and observe safety warnings in front of manual.

IMPORTANT

Repairs or maintenance requiring power should be

performed by trained maintenance personnel only.

• Park the mower on level ground. Make sure that steering

control levers are in the neutral position, and that the deck

blade switch is in “OFF” position. Raise deck, remove the

magnetic bar and disconnect battery cables by pulling

inward on RED battery quick disconnect handle in battery

box compartment.

• Any maintenance operation that requires the removal of

safety covers must be performed by a trained service

technician.

• Before working on or under the deck, make certain the

magnetic bar is removed and deck blade switch cannot be

accidentally started and disconnect battery cables by

pulling inward on RED battery quick disconnect handle

in battery box compartment.

• Use a stick or similar instrument to clean under the

mower, making sure that no part of the body -- especially

arms and hands -- is under mower.

• Keep your machine clean and remove any deposits of

trash and clippings.

• Keep battery compartment, deck and operator’s station

clean of accumulated trash, grass clippings, and other

debris.

• Clean battery compartment, drive motor compartment,

mower deck, seat, etc., of all dirt and debris. To clean, use

only compressed air. DO NOT use water, solvents, hard

cleaners or abrasives.

• Always wear adequate eye protection when servicing the

batteries or when grinding mower blades and removing

accumulated debris. Never attempt to make any

adjustments or repairs to the mower’s drive system,

mower deck or any attachment while the traction drive

system is running. Repairs or maintenance requiring

power should be performed by trained maintenance

personnel only.

• Never work under the machine or attachment unless it is

safely supported with jack stands. Make certain machine

is secure when it is raised and placed on the jack stands.

• The jack stands should not allow the machine to move

when the traction drive system is running and the drive

wheels are rotating. Use only certified jack stands. Use

only appropriate jack stands, with a minimum weight

rating of 2000 pounds (907.2 kg) to block the unit up.

Use in pairs only. Follow the instructions supplied with

the vehicle stands.

• Do not touch hot parts of machine.

• Keep nuts and bolts tight, especially the blade attachment

bolts. Keep equipment in good working condition.

• Never tamper with safety devices. Check their proper

operation regularly.

• Remove the magnetic bar before unclogging the

discharge chute.

• Never clear the discharge chute with the machine

running. Remove the magnetic bar and be sure the blades

have stopped before cleaning. Use a stick to clear a

plugged discharge area. Never use your hand!

• Stop unit and allow blades to stop before unclogging

chute. Grass collection system components are subject to

wear, damage and deterioration, which could expose

moving parts or allow objects to be thrown. Frequently

check components and replace with manufacturer’s

recommended parts, when necessary.

• Exercise caution when working under the deck as the

mower blades are extremely sharp. Wear gloves and use

extra caution when servicing them.

• Use only genuine Cramer Mower parts to ensure that

original standards are maintained.

• Always disconnect batteries when transporting unit. Keep

unit free of grass clippings, leaves and other debris.

8 CLEANING AND STORAGE

8.1 CLEAN THE MACHINE

• Remove any build-up of grass and leaves on or around

the motor cover (Do not use water from a high-pressure

gun to flush the motor).

• Occasionally wipe the mower clean with a dry cloth.

• If debris builds up on the underside of the mower during

use, stop the motor, turn off the machine, and scrape it

clean using an appropriate tool.

8.2 STORE THE MACHINE

The following steps should be taken in order to prepare the

machine for storage.

• Clean the machine as described in the previous section.

• Inspect the blade and replace it or sharpen it, if required

(refer to the Maintenance section).

• Do not store the machine next to corrosive materials, such

as fertilizer or rock salt.

• Keep the machine out of the reach of children.

• Do not cover the machine with a solid plastic sheet.

Plastic coverings trap moisture around the machine,

which causes rust and corrosion.

• Check thoroughly for any worn or damaged parts that

need replacing and order them from your dealer.

English EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82ZT132 in the language / languages: All languages as an attachment in your email.

The manual is 4.79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cramer 82ZT132 Manual

Product: