818973
19
Zoom out
Zoom in
Previous page
1/422
Next page
Error Code Description Solution
MR8 Controller undervoltage The voltage is too low. Charge the battery pack before use.
MR9 Controller overvoltage The voltage is too high. Restart the power supply.
MR10 Battery low temperature The temperature of the battery compartment and battery is
too low. Use the machine at a suitable temperature and
restart the power supply.
MR11 PMU overtemperature High battery
temperature
The temperature of the battery compartment and battery is
too high. Wait for the battery to cool down, and then restart
the power supply.
MR12 Motor overtemperature The motor temperature is too high. Wait for the motor to cool
down, and then restart the power supply.
MR13 Controller overtemperature The controller temperature is too high. Wait for the controller
to cool down, and then restart the power supply.
MR14 Software overcurrent The load is too high. Restart the power supply.
MR15 Hardware overcurrent The load is too high. Restart the power supply.
MR16 Speed controller error Check that the speed controller of handle is connected prop-
erly, and then restart the power supply.
MR17 Controller pre-charge error Restart the power supply.
MR18 Brake error Restart the power supply.
MR19 Operating sequence error Place the left and right handles in the park position, and the
blade start switch in the OFF position. Sit in the seat and try
again.
MR20 Angle sensor error Restart the power supply.
MR21 Relay error Restart the power supply.
MR22 Magnetic valve error Check that the solenoid valve of motor is connected proper-
ly, and then restart the power supply.
MR23 Battery compartment (PMU) com-
munication failure
Communication failure with battery compartment. Restart
the power supply.
MR24 Battery compartment (PMU) failure Minor/major error in battery compartment. Perform a check
and restart the power supply.
MR25 CAN timeout error - left drive Communication failure with the left drive controller. Restart
the power supply.
MR26 CAN timeout error - right drive Communication failure with the right drive controller. Restart
the power supply.
MR27 CAN timeout error - left blade Communication failure with the left blade controller. Restart
the power supply.
MR28 CAN timeout error - central blade Communication failure with the central blade controller. Re-
start the power supply.
MR29 CAN timeout error - right blade Communication failure with the right blade controller. Restart
the power supply.
MR30 Battery compartment flip cover error Check that the connector under the seat is connected prop-
erly, and then restart the power supply.
MR31 Failed to verify blade signal Check that the blade start switch is connected properly, and
then return the switch to its initial position.
MR32 Software authentication error Restart the power supply.
19
English EN
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82ZT107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82ZT107 in the language / languages: All languages as an attachment in your email.

The manual is 7.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info