818973
8
Zoom out
Zoom in
Previous page
1/422
Next page
4.1.6 SAFETY START INTERLOCK SYSTEM
The machine is equipped with a safety start interlock system consisting of the park brake switches, operator
presence switch, and deck blades ON and OFF switch.
The mowers safety start interlock system is also designed to protect the operator and others from accidental injury
due to unintentional traction drive system starting.
Check mower safety start interlock system daily, prior to operation. This system is an important mower safety feature.
It should be repaired immediately if it malfunctions. The machine incorporates a separate operator presence switch
which will stop the drive system and deck motors when the operator is not in place for any reason while the mower is
operating. This is a safety feature designed to prevent runaway or accidental entanglement.
WARNING
The safety interlock system must not be disconnected or bypassed. Doing so could cause the machine to operate
unexpectedly, resulting in personal injury.
To inspect the system:
1. The operator must be on the seat when testing the operator presence switch.
2. Turn the key to start the machine.
3. Pull the steering control levers to the parking slots.
4. Pull up on the PTO switch to engage the motor.
5. Slowly raise off of the seat. The deck blade system should stop.
6. If the deck blade system fails to stop when the operator is off from the seat and if the cause cannot be
determined, contact your Cramer dealer immediately.
4.2 OPERATE THE MACHINE
4.2.1 START THE MACHINE
See figure 14
NOTE
Clear the area of bystanders before operating the mower. If anyone enters the mowing area, stop immediately and
do not return to mowing until the bystanders leave the area.
1. Raise the mower deck to its highest position.
2. Insert the start key and turn to ON position.
3. Pull right and left steering control levers inward.
4. Pull up on deck PTO switch to start cutting blades for mowing.
NOTE
Only engage blades when steering control levers are in the NEUTURAL position! NEVER engage blades when
moving!
5. Place steering control levers in forward (D) position and drive to desired mowing location.
NOTE
Use caution when crossing over gravel paths or driveways. Before crossing, disengage the blades and raise the
cutting deck to the highest position to minimize the possibility of ricochet. Drive slowly to avoid loss of traction
and control.
NOTE
Do not attempt to change the direction of operation while the mower is in motion. Always come to a complete
stop before changing the mower direction.
8
English
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82ZT107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82ZT107 in the language / languages: All languages as an attachment in your email.

The manual is 7.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info