818973
6
Zoom out
Zoom in
Previous page
1/422
Next page
3.3.1 STEERING CONTROL LEVERS
The two levers control the mowers speed, direction, stopping, neutral lock, and parking brake. Levers are used to
steer, accelerate, decelerate, stop, and change direction. When the control levers are in the park brake position, the
mower will not move.
NOTE
Always drive with both hands. Do not drive with just one hand.
3.3.2 USE THE APP
See figure 9-10
1. Visit the website of Fleet Management: fleet.cramertools.com
2. Create an account and then log in.
3. Invite other users in your organization.
4. Scan the QR code, download the app and log in.
5. Add a device. Find the serial number, pairing code and QR code in the vehicle matching label on this manual.
Scan QR code or type in manually.
3.4 NEUTRAL BYPASS KNOB
See figure 7-8
1. Pull the neutral bypass knobs outwards and then downwards to unlock the wheel.
2. Move the neutral bypass knobs back into position to lock the wheels.
WARNING
Never drive mower with the neutral bypass knob working. Always install the neutral bypass knob to the original
position before driving! Failure to re-install the knob could cause serious damage to your mower and void mower
warranty!
WARNING
Never unlock the neutral bypass knob when the machine is working on the slope!
3.5 ANTI-SCALP WHEELS
See figure 2
Anti-scalp wheel kits are standard on Cramer units. These anti-scalp wheels are designed to minimize scalping when
mowing on rough, uneven terrain. After setting the cutting height, adjust the anti-scalp wheels so they extend below
the deck but do not contact the ground. They should always be at least 0.6 cm to 1.9 cm below the deck. With the
unit sitting on a flat level surface, the wheel position can be adjusted up or down as needed from 1.9 cm to 4.4 cm
below the blade surface. Move the wheels up or down - using the different axle mount holes in the wheel mount
bracket (if applicable on model).
4 OPERATING INSTRUCTIONS
4.1 BEFORE OPERATION
4.1.1 ADJUST THE SEAT
See figure 11
WARNING
Make sure seat pan is securely bolted down prior to each use to prevent seat from moving/tilting in the event of
mower tipping or rollover.
1. Push steer control levers outward into PARK BRAKE position before you adjust the seat.
2. Sit down on seat and lift the seat adjustment lever.
6
English
EN
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82ZT107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82ZT107 in the language / languages: All languages as an attachment in your email.

The manual is 7.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info