818999

Cramer 82HD62 Manual

5
Zoom out
Zoom in
Previous page
1/135
Next page
WARNING
If the blade jams on an electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BE LIVE AND
DANGEROUS. Do the steps below:
1. Hold the insulated rear handle or put the machine down
and away from you.
2. Disconnect the electrically service to the damaged line
or cord before you try to free the blade.
5.1 START THE MACHINE
Figure 3.
1. Press the power button (9).
2. Push and hold the micro switch (8) with one hand.
3. Push the trigger (4).
5.2 STOP THE MACHINE
Figure 3.
1. Release the trigger to stop the machine.
5.3 4-STEP SPEED ACTIVATION
Figure 3.
1. This machine has 4-step speed limiter. The feature is used
to optimize performance and runtime after the different
circumstances. With a higher cutting speed you consume
more energy opposed to using a lower cutting speed and
saving energy for more run time. To use the 4-step speed
limiter, pull speed control button forward to change the
speed limiter.
5.4 REVERSE ROTATION FUNCTION
1. If the branch is blocked in the blade, push the anti-
jamming button on the control panel, the blade will
reverse and the branch will be released.
5.5 TURN THE REAR HANDLE
Figure 4.
You can use the rotating button to adjust the rear handle to
different positions to cut the hedges easier.
1. Pull the rotating button and turn the rear handle.
2. Release the rotating button until it locks into position.
5.6 OPERATION TIPS
• Do not push the machine through heavy shrubbery. This
can cause the blade blockage. If the blades blocks,
1. stop the machine.
2. remove the battery pack.
3. remove the blockage.
• Do not try to cut too large stems or twigs.
• Wear the gloves when you cut.
• Cut the new growth with a wide sweeping action so that
the stems are put directly into the blade.
• You can use a string to adjust the height of the hedge.
1. Stretch a piece of string along the hedge at this
height.
2. Cut the hedge immediately above this string.
3. Cut the side of a hedge until it will be narrower at the
top. More of the hedge will come into view in that
way.
6 MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
6.1 CLEAN THE MACHINE
WARNING
Keep the machine and the motor free of leaves, branches or
excessive oil to prevent fire risks.
• Use a moist cloth with a mild detergent to clean the
machine.
• Clean all moisture with a soft dry cloth.
• Use a small brush to clean the air vents.
6.2 LUBRICATE PLUG
Figure 6.
To increase the efficiency and life of the machine, check and
lubricate the machine monthly.
NOTE
Lack of the lubricate oil will cause the excessive noise,
overheating or damage.
1. Use the screwdriver ( not included ) to remove the
lubricate plug (16).
2. Inject sufficent lubricate oil with the grease gun or tube
(not included) to the lubricate plug.
3. Insert and tighten the lubricate plug.
5
English EN
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82HD62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82HD62 in the language / languages: All languages as an attachment in your email.

The manual is 2.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info