818997
8
Zoom out
Zoom in
Previous page
1/240
Next page
Problem Possible cause Solution
The machine does
not start. The chain brake is
engaged.
Pull the chain
brake in the direc-
tion of the user to
disengage it.
The machine and
battery are not
connected correct-
ly.
Make sure that the
battery release
button clicks when
you install the bat-
tery pack.
The battery level
is low.
Charge the battery
pack.
The lock out but-
ton and the trigger
are not pushed at
the same time.
1. Push the lock-
out button and
hold it.
2. Push the trig-
ger to start the
machine.
The battery is too
hot or too cold.
Refer to battery
and charger man-
ual.
The machine does
not start when the
battery pack only
has one or two
lights flash.
1. The battery
pack is in a low
capacity.
1. Cool the bat-
tery pack or
machine to
ambient tem-
perature.
2. Charge the
battery pack
again.
3. Start the ma-
chine again.
2. The battery
pack or control
board at high tem-
perature protective
state.
The motor runs,
but the chain does
not cut correctly,
or the motor stops
after around 3 sec-
onds.
The machine is in
the protection
mode to protect
the PCB.
Release the trigger
and start the ma-
chine again. Do
not force the ma-
chine to cut.
The battery is not
charged.
Charge the battery.
Refer to the bat-
tery and charger
manual for correct
charging proce-
dures.
The chain is not
lubricated.
Lubricate the
chain to decrease
the friction. Do
not let the guide
bar and the chain
operate without
sufficient lubri-
cant.
Incorrect battery
storage tempera-
ture
Cool the battery
pack until it de-
creases to the am-
bient temperature.
8 TECHNICAL DATA
Voltage 48 V DC
No load speed 20 m/s
Guide bar length 360 mm
Chain stop < 0.12 s
Chain oil capacity 200 ml
Weight (without battery
pack)
3.6 kg
Measured sound pressure
level
LpA= 94 dB(A), KpA= 3
dB(A)
Guaranteed sound power
level
LwA.d= 108 dB(A)
Vibration 12.2 m/s2 , K = 1.5 m/s2
Chain 90PX052X
Guide bar 144MLEA041 554557
Battery model 48V192 and other BAM ser-
ies
Charger model 48C and other CAM series
9 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category: Chainsaw
Model: 48CS18
Serial number: See product rating label
Year of Construction: See product rating label
is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
is in conformity with the provisions of the following
other EC-Directives:
2014/30/EU
2000/14/EC & 2005/88/EC
10
English
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 48CS18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 48CS18 in the language / languages: All languages as an attachment in your email.

The manual is 2.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info