652664
26
Zoom out
Zoom in
Previous page
1/32
Next page
Common Spa Water Problems~Cause & Remedy
PROBLEM POSSIBLE CAUSES SOLUTIONS
CLOUDY
WATER
A. Poor Filtration
B. Suspended particles
C. Organic contaminants build up
D. pH high
E. Total alkalinity high
F. Combined chlorine in
the water
G. High dissolved solids
H. Hardness too high
A. Dirty filter, clean with Arctic Pure
®
Filter Restore
(not with disposable filter).
B. Add Arctic Pure
®
Easy Clear
C. Shock treatment with Arctic Pure
®
Refresh
D. Add Arctic Pure
®
Adjust Down until level reads 7.2-7.6
E. Add Arctic Pure
®
Adjust Down to adjust TA level to
100-130 ppm
F. Shock treatment until combined chlorine is
eliminated (see container instructions)
G. Empty spa and refill
H. Add Arctic Pure
®
Best Defence until level reads
100-280 ppm
COLOURED
WATER
A. Dissolved metals from
water source
B. Low chlorine/bromine levels
C. Fragrance
A. Use Arctic Pure
®
Best Defense and have your
dealer check your water balance
B. Add Arctic Pure
®
Boost treatment to raise chlorine
levels and test chlorine levels or for Bromine system
add Peak Boost & test Bromine levels
C. Stop the use of fragrance
FOAMING
A. High concentration of oils and
organics being agitated by
the jets and/or Therapy Air
A. Squirt Foam Dissolve
TM
on foam.
Refer to pg 20 for more information.
(not with disposable filter).
SCALE
DEPOSITS
A. High Calcium level, high
pH, high alkalinity
A. Drain partially, add Arctic Pure
®
Best Defence,
correct pH level to 7.2 - 7.6 and alkalinity to 100-
130 ppm.
ODOR
A. High level of organic
contaminants, combined
with chlorine
A. Check pH and adjust as required.
B. Shock with Arctic Pure
®
Refresh, add Boost or Peak
Boost (dependent on whether you have a chlorine or
bromine system)
C. Dilution of water will reduce contaminants and odor.
D. Check any ozone system is operational
EYE/SKIN
IRRITATION
A. pH too low
B. Combined chlorine due to high
concentration of organic
contaminants
C. Allergic reaction to sanitizer
D. Bacterial contamination
A. Add Arctic Pure
®
Adjust Up until level reads 7.2-7.6 ppm
B.
Add Arctic Pure
®
Refresh, add Boost or Peak Boost.
C. Change from Bromine to Chlorine or vice versa.
D. Drain and refill spa.
NO
CHLORINE/
BROMINE
READING
A. High concentration of contaminants
using up sanitizers
B. Test kit reagents ineffective
A. Add sanitizers until levels are up to the recommended
levels
B. Replace test kits at least once a year
C. Chlorine/Bromine level very high and is bleaching
test reagent, Allow sanitizer levels to recede by
opening cover and running jets.
25
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Coyote Intergalactic - Spa Whirlpool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Coyote Intergalactic - Spa Whirlpool in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Coyote Intergalactic - Spa Whirlpool

Coyote Intergalactic - Spa Whirlpool Usermanual and installation guide - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info