652664

Coyote Intergalactic - Spa Whirlpool Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
Refer to the Quick Reference Guide
9
3. Turn on the power.
Engage the breaker at the main panel, and then the GFCI /RCD sub panel and other switching devices installed by your
electrician. If wired correctly, the control panel will blink, showing the current water temperate. At this time you
should also see water movement through jets, if not you may have an air lock in the pump. e quickest way to rid
an air lock is to turn power o, then locate pump one and loosen the top union to let the air bleed out. When you
see a steady stream of water retighten the union and turn power back on.
4. Activate the jets.
Ensure all jet faces are in the full “open” position (clockwise). Set all the Venturi valves to the “open” position to
more clearly see water coming from all the jets. Press the PUMP 1 button to engage the lowest speed. While the low
speed is running slowly, locate the lter canister, and remove the black circular cover and locate the “Air Vent
Bleeder” inside. Turn the “Air Vent Bleeder” until you hear air movement. Once the air is escaping, stop
unscrewing until the water bleeds out for a few seconds. en, slowly and gently screw the “Air Vent Bleeder” back
down until the water stops coming from the valve. Press the PUMP 1 and PUMP 2 buttons (if equipped). You
should see and be able to feel water coming from all of the jets. is will show that there isn’t any air trapped within
the system. If water is not exiting from the jets, see the troubleshooting section of this guide or call your Coyote
Spas outlet.
5. Add the Start-Up Chemicals
Add the spa chemicals as directed by your Coyote Spas salesperson, as per the instructions within this manual,
or after reading the chemical supply bottles in your Start-Up kit.
6. Set the Temperature.
Your spa has a standard temperature range of 59-104
o
F, 15-40
o
C. You may adjust these settings using the UP or DOWN
buttons on your spa side control. Simply press and hold the button until the correct setting is reached and release.
See the Quick Reference Card (QRC) provided with your spa for specific controller information.
7. Set the Filtration.
Please refer to the Quick Reference Card (QRC) provided with your spa for assistance in setting the filtration.
8. Install the Hardcover.
Place the cover on your spa, ensuring that it sits squarely around the corners. Position the locking straps on the cabi-
net walls and attach them with the screws that have been supplied. Allow some slack in the tie downs for shrinkage
in cold weather.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Coyote Intergalactic - Spa Whirlpool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Coyote Intergalactic - Spa Whirlpool in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Coyote Intergalactic - Spa Whirlpool

Coyote Intergalactic - Spa Whirlpool Usermanual and installation guide - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info