652664
9
Zoom out
Zoom in
Previous page
1/32
Next page
8
Once the spa is placed on a solid foundation and supplied with power, the spa should be filled and prepared for
use. For the best results, read each step completely before proceeding with the following steps.
1. Prepare the spa for filling.
Clear all the debris from the inside of the tub.
Wipe off and clean the acrylic with a wet towel to remove dust.
Remove the service door and tighten all the hand unions at the pump(s) and heater.
Ensure all the knife valves are in the open (UP) position.
2. Fill the spa.
A. Front Access Skim Filter (Mesa)
Fill the spa through the opening until the water submerges all of the jets excluding the neck jets and
1/2 way up the opening of the weir gate. DO NOT let the water go below 1/2 of the way up the weir
gate assembly.
B. Pressure Filter Canister Assembly (Havasu, Vegas)
Locate the filter canister. Remove the lock ring and the filter lid. Remove
the filter element. Insert the garden hose into the filter canister and begin
to fill the spa. Once the water has filled the foot-well, add Stain & Scale
Defense (refer to the directions on the product label). Insert the hose into
the foot-well and continue to fill until the water is 2.5 cm (1”) above the
wall jets (excluding the neck jets) or covering 2/3 of the skimmer. Reinstall
the filter, lid and lock ring. The lock ring should spin and then lock into place.
Fill the tub with the garden hose until all jets excluding the neck jets are submerged.
C. Floating Weir Filter Assembly
(Durango, Santa Fe, Tucson, Reno, Outlaw, Amarillo, Tempe, Laredo, Maricopa, Pomona, Escondido)
Using a garden hose with a pre-filter, fill the spa with pre-filtered water to the bottom of the pillows
Start-Up Instructions
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Coyote Intergalactic - Spa Whirlpool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Coyote Intergalactic - Spa Whirlpool in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Coyote Intergalactic - Spa Whirlpool

Coyote Intergalactic - Spa Whirlpool Usermanual and installation guide - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info