632803
23
Zoom out
Zoom in
Previous page
1/44
Next page
Edition 05/2014 - X-ONE - page 23
SACOME, CONFIDENTIAL Document,
it is forbidden to duplicate or communicate this document without previous authorization.
PID adjustment range
The PID is a system for adapting the heating power in the coffee boiler.
The goal is to have a better stability of the T ° in the coffee boiler
Principle of operation:
Every 2 seconds, electronics evaluates the power to provide to the heater. This calculation is performed in a
working range of 5 ° C around the setting temperature (range = 5 ° C). Beyond that, the machine is full
power.
This calculated power is depending on the measured temperature weighted by 3 coefficients:
Where is the temperature: Kp
At what speed is changing the temperature: Kd
How has evolved the temperature since the beginning: Ki
This gives a percentage rise of full power given to the heater. And It’ shown by the blinking leds on the solid
state relays.
It is recommended to keep the default settings.
PID system is a compromise between SPEED and PRECISION.
The aim is to limit overruns while maintaining accuracy, speed and robustness.
Filling up Time out adjustment:
It allows to allocate to the machine a maximum permissible time for filling the boiler.
Beyond this time, machine stops and an alarm message is displayed.
The values are in seconds.
The setting is made with + and – key.
To exit, press MENU, or wait 30 seconds.
Water softener:
This menu concern the water treatment parameters. We define the alarm threshold before changing the filter
(0 to 9999 litres).
The amount of water consumed includes:
The water passes through the coffee flowmeters.
The water enters the steam boiler
The setting is made with + and – key. (Hold the key for 5 seconds
scroll faster)
To exit, press MENU, or wait 30 seconds.
When the water volume consumed is reached, the display shows:
To reset the counter, when the filter has been changed: see chapter “reset counters”
Total coffee:
This Indicate the total number of products (coffee + tea) produced since the installation of the machine.
This counter is not resetable.
Change filter
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conti X-One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conti X-One in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info