542391

Constructa CF234653 Manual

30
Zoom out
Zoom in
Previous page
1/48
Next page
30
Notes
■ Between the times ƒƒ:‹‹ and †:†Š the clock display is
dimmed if you do not make any settings in that period or no
clock function is activated.
■ When you set a clock function, the time interval increases
when you set higher values (e.g. cooking time up to‚:‹‹œ to
the minute, using ‚:‹‹œ
to the nearest 5 minutes).
■ For the Q minute minder, x cooking time, y end of
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the Q or y
symbol flashes. To cancel the audible signal before it ends,
press the KJ clock function button.
■ Briefly press the KJ clock function button to select a clock
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Switching the clock display on and off
1.Press and hold the KJclock function button for 6 seconds.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
2.Press the KJclock function button briefly.
The clock display switches on.
Timer
1.Press the KJclock function button repeatedly until the KJ
and Q symbols light up.
2.Set the duration using the rotary selector (e.g. †:‹‹ minutes).
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1.Set the operating mode and temperature.
The appliance heats up.
2.Press the KJclock function button repeatedly until
the KJand x symbols light up.
3.Set the cooking time with the rotary selector
(e.g. ‚:„‹ hours).
The setting is applied automatically. The time is then
displayed again and the set cooking time counts down.
Once the cooking time has elapsed, the appliance switches off
automatically.
1.Turn the operating mode and temperature selector back to
the Û position.
2.Press the KJ clock function button to exit the clock function.
End of operation
Automatic switch-off at a set time.
1.Set the operating mode and temperature.
The appliance heats up.
2.Press the KJclock function button repeatedly until the KJ
and y symbols light up.
3.Set the end of operation using the rotary selector
(e.g. ‚ƒ:„‹ o'clock).
The setting is applied automatically. The clock is then
displayed again.
The appliance switches off automatically at the time set for the
end of operation.
1.Turn the operating mode and temperature selector back to
the Û position.
2.Press the KJ clock function button to exit the clock function.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
1.Set the operating mode and temperature.
The appliance heats up.
2.Press the KJclock function button repeatedly until
the KJand x symbols light up.
3.Set the cooking time with the rotary selector
(e.g. ‚:„‹ hours).
The setting is applied automatically.
3 Clock Setting the clock
f Rapid heat up Shortens the heat up time
Clock function Use
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CF234653 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CF234653 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Constructa CF234653

Constructa CF234653 User Manual - German, French - 48 pages

Constructa CF234653 User Manual - Italian - 24 pages

Constructa CF234653 User Manual - Polish - 24 pages

Constructa CF234653 User Manual - Portuguese - 24 pages

Constructa CF234653 User Manual - Swedish - 24 pages

Constructa CF234653 User Manual - Turkish - 24 pages

Constructa CF234653 User Manual - Spanish - 24 pages

Constructa CF234653 User Manual - Norwegian - 24 pages

Constructa CF234653 User Manual - Finnish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info