Manual Constructa CD30645 (page 26 of 56) (English, German, Dutch, French)

714959

Zoom out

Zoom in

1/56

2. Connect the power cord provided to the appliance. ¨

3. Use the strain relief to secure the power cord in place.©

4. Screw the two angle brackets to the appliance. Ensure that

the screws are positioned correctly.ª Screw in the screws

until 8 mm of the threaded section is still protruding. «

Installation

1. Use the angle brackets to hang the appliance on the screws

and align it.

2. Measure the distance from the appliance to the wall and

mark this on the filler strip.

3. If required, shorten the filler strip to the required dimension.

4. Remove the appliance and screw in the filler strip.

5. Remount the appliance, align it and screw it in place.

Carefully screw in all screws.

6. Establish the electrical connection.

Note: The extractor hood's housing can be concealed within

the upper cabinet. In doing so, you must observe the following:

■ The intermediate floor must not be placed on the extractor

hood's housing.

■ The front panel must not be secured to the housing.

■ Access must be available in order to change the filter and for

after-sales service.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CD30645 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CD30645 Manual

Product: