Manual Constructa CD22130 (page 34 of 56) (English, German, Dutch, French, Italian, Swedish, Spanish)

511355

Zoom out

Zoom in

1/56

Removal the grease filter:

Open door as far as it will go.

2. Push the filter screen up slightly, lift it

towards you over the brackets and take

it out downwards..

3. Remove the wire grid.

4. Fleece grease filter

Remove saturated filter mat, clean the fil-

ter grid and insert new filter mat.

Fitting grease filters:

Clamp in the filter mats with the wire

grid.

2. Position the filter screen against the hou-

sing and push upwards. Push in the

lower edge over the lugs and lower the

grid into place.

Filters and maintenance

5. Insert activated carbon filter in the lower

left corner of the housing. Shift it until both

hooks slot into the holes and then secure in

place with the wing nut.

6. Position the filter

screen against the

housing and push

upwards. Push in

the lower edge

over the brackets

and lower the

screen into place.

Check that the filter screen is securely

located behind the retaining brackets on

both sides.

Removal is in the reverse sequence.

Replacing the activated carbon filter:

q During normal operation (daily 1 to 2

hours) the activated carbon filter must be

replaced approximately 1x year.

q The activated carbon filter can be

purchased FROM YOUR DEALER (see

Optional accessories).

Only use original filters.

q These ensure optimum function.

Disposal of the old activated carbon filter:

q Activated carbon filters do not contain

any harmful substances. They can be

disposed of as residual waste.

Check that the filter screen is securely

located behind the retaining brackets on

both sides.

Activated carbon filter:

For binding odours in recirculating air mode.

Fitting and removal:

1. Open door to the stop.

2. Push the filter screen

up slightly, lift it

towards you over the

brackets and take it

out downwards.

3. Insert the screw through the wing nut

and bushing and screw into the housing

(only necessary upon initial fitting. The

screw and wing nut are included with

activated carbon filter.

4. Using a screwdriver or similar, press the

two lugs in the housing through to the

back (only necessary upon initial fitting).

Metal grease filter

Remove saturated filter mats, clean

mats and

grid.

Refit the cle-

aned filter

mats,

making sure

that there is

no gap in the middle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CD22130 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 9,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CD22130 Manual

Product: