652338
42
Zoom out
Zoom in
Previous page
1/80
Next page
42 Operating the control software
BACnet Parameters Tab
BACnet: with this setting you can activate ("MSTP" or "BACnet/IP") or
deactivate ("Off") the communication via the integrated BACnet interface.
Note: in order to activate the setting of this parameter the Condair RS
must be switched off and on again.
Important! The switching from "BACnet IP" to "BACnet MS/TP" is only
taken over after the restart, if the "Source" setting in the "Control Set-
tings" submenu is set to "Analog" or the corresponding BACnet mode!
The Integrated Controller does not switch, if for example "BACnet IP" is
selected, but the "Source" setting in the "Control Settings" submenu is
set to "BACnet MS/TP".
Factory setting: Off
Options: Off (BACnet interface deactivated)
MSTP (BACnet MSTP via RS 485 interface, Note:
the Condair RS is a slave-only BACnet MSTP
device)
BACnet/IP (BACnet/IP via RJ45 interface)
The following settings appear only, if the parameter "BACnet" is set to
"BACnet/IP".
Device Name: with this setting you determine the name of the Condair
RS for the communication via the integrated BACnet interface.
Device Description: with this setting you determine a short descrip-
tion of the Condair RS.
Device Location: with this setting you determine the designation of
the unit location.
Node ID: with this setting you assign a node ID to the Condair RS for
the communication via the BACnet/IP protocol.
Factory setting: 1001
Setting range: 1-9999999
BACnet IP Port: with this setting you assign a IP port number for the
Condair RS.
Factory setting: 47808
Setting range: –––
BACnet MSTP MAC: with this setting you assign a MSTP MAC ad-
dress for the Condair RS.
Note: this setting does not have any effect for BACnet IP communication.
Factory setting: 128
Setting range: 128-254
42


Need help? Post your question in this forum.

Forumrules
1

Forum

condair-rs

Reset search

  • why drain hose led to left, is it due to electrical on right side.
    Submitted on 29-8-2022 at 23:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair RS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair RS in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair RS

Condair RS Installation Guide - English - 80 pages

Condair RS User Manual - Dutch - 80 pages

Condair RS Installation Guide - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info