652338
41
Zoom out
Zoom in
Previous page
1/80
Next page
41Operating the control software
Modbus Parameters Tab
Modbus: with this setting you can activate ("On") or deactivate ("Off")
communication via a Modbus network.
Note: in order to activate the setting of this parameter the Condair RS
must be switched off and on again.
Factory setting: Off
Options: Off or On
The following parameters appear only if the Modbus function is activated.
Modbus Address: with this setting you determine the Modbus address
for the Condair RS for the communication via a Modbus network.
Factory setting: 10
Setting range: 1 ... 247
Parity: with this setting you set the parity bit for the data transfer.
Factory setting: Even
Options: None, Even or Odd
Baudrate: with this setting you set the Baudrate for the data transfer.
Factory setting: 9600
Options: 110, 300, 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, 76800 or 115200
Register Sequence: with Modbus communication 32 Bit oating-point
numbers are transmitted in two registers of 16 Bit each. In order that
sender and receiver understand each other (that means both use the
identical partitioning of the 32 Bit to the two 16 Bit registers) it must be
determined whether the high-order register (MSR = Most Signicant
Register) or the low-order register (LSR = Least Signicant Register)
is transmitted rst. With this setting you determine which register is
transmitted rst when transmitting oating-point numbers.
Factory setting: LSRrst
Options: LSRrst(low-order register is transmitted rst)
MSRrst(high-order register is transmitted rst)
41


Need help? Post your question in this forum.

Forumrules
1

Forum

condair-rs

Reset search

  • why drain hose led to left, is it due to electrical on right side.
    Submitted on 29-8-2022 at 23:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair RS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair RS in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair RS

Condair RS Installation Guide - English - 80 pages

Condair RS User Manual - Dutch - 80 pages

Condair RS Installation Guide - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info