652338
28
Zoom out
Zoom in
Previous page
1/80
Next page
28 Operating the control software
Softstart Tab
Softstart Mode: with this setting you can activate ("On") or deactivate
("Off") the softstart function.
Factory setting: Off
Options: On or Off
Note: activate the soft start function if you are using softened water or
water with a high conductivity.
Note: if the softstart function is activated the humidication capacity is
reduced to a preset value for a select able period if a demand is present
after restarting the steam humidier or after more than 4 hours in standby
operation (settings see parameters below).
The following settings appear only, if "Softstart Mode" is set to "On".
Softstart Time: with this setting you determine how long the softstart
functions should remain activated in minutes.
Factory setting: 30 minutes
Setting range: 10 ... 120 minutes
Softstart Power: with this setting you determine the capacity limitation
for the softstart function in % of the maximum capacity of the humidi-
er.
Factory setting: 75 %
Setting range: 4 ... 100 %
The following settings appear only, if "Idle Mode" is set to "Keep Warm".
Note: If the keep warm function for standby operation is activated the
temperature of the water in the steam cylinder is held on 60 °C (at 20 °C
ambient temperature), so that the humidier can produce steam as fast as
possible as soon as a demand is present again. If the ambient temperature
is higher or lower than 20 °C the heating power of the heating elements
can be increased or decreased via the keep warm offset parameter to
hold the keep warm temperature of 60 °C.
Keep Warm Offset A: with this setting you can increase or decrease
the heating power of the heating elements of the keep warm function
for steam humidier A by the desired percentage.
Factory setting: 0 %
Setting range: –5%...+5%
Keep Warm Offset B: with this setting you can increase or decrease
the heating power of the heating elements of the keep warm function
for steam humidier B by the desired percentage.
Note: this menu item appears only on double units or the large units
with two steam cylinders.
Factory setting: 0 %
Setting range: –5%...+5%
28


Need help? Post your question in this forum.

Forumrules
1

Forum

condair-rs

Reset search

  • why drain hose led to left, is it due to electrical on right side.
    Submitted on 29-8-2022 at 23:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair RS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair RS in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair RS

Condair RS Installation Guide - English - 80 pages

Condair RS User Manual - Dutch - 80 pages

Condair RS Installation Guide - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info