652338
65
Zoom out
Zoom in
Previous page
1/80
Next page
65Mounting and installation work
Connecting an external ohmic limiter controller
LIMIT
IN GND
140Ω...10kΩ
A5
CONTROL
V+ IN GND
JP2 (24V)
JP1 (10V)
Control compartment
The signal cable of an ohmic limiter controller
(140Ω...10kΩ) is to be connected according to the wir-
ing diagram to the terminals "V+" (CONTROL terminal)
and "IN" and GND" (LIMIT terminal) on the driver board
in the control compartment.
The connecting cable must be led through a cable gland
into the control compartment.
Note: when connecting an ohmic limiter controller
Jumper "JP2" must be removed and Jumper "JP1" must
be connected on the driver board. The limiter must be
activated and limiter signal type must be set to 0-10V
in the control settings of the control software.
Connecting the optional remote operating and fault indication
Error Service Steam Unit On
F1 (100 mA)
H1
1 2 3
4 5 6
7 8
9 10
Control compartment
The optional remote operating and fault indication board
contains four potential-free relay contacts for the con-
nection of the following operating and fault indications:
"Error" (Terminal 1 and 2):
This relay is activated if an error is present.
"Service" (Terminal 4 and 5):
This relay is activated when the set maintenance
interval has elapsed.
Note: this relay can be congured in the control
software to close either when maintenance is re-
quired or when maintenance is required and when
a warning is indicated.
"Steam" (Terminal 7 and 8):
This relay closes as soon as the Condair EL hu-
midies.
"Unit on" (Terminal 9 and 10):
This relay closes as soon as the voltage supply
to the Control compartment of the Condair EL is
switched on.
The connecting cable must be led through a cable gland
or grommet into the control compartment.
The maximum contact loading is 250V/8A.
Appropriate suppressor modules are to be used for the
switching of relays and miniature contactors.
65


Need help? Post your question in this forum.

Forumrules
1

Forum

condair-rs

Reset search

  • why drain hose led to left, is it due to electrical on right side.
    Submitted on 29-8-2022 at 23:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair RS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair RS in the language / languages: English as an attachment in your email.

The manual is 7,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair RS

Condair RS User Manual - English - 80 pages

Condair RS User Manual - Dutch - 80 pages

Condair RS Installation Guide - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info