652344
62
Zoom out
Zoom in
Previous page
1/80
Next page
62 Mounting and installation work
5.7.6 Installation work external connections
Connecting the external safety chain
PEPESC2SC1NL1
MAIN SUPPLY
K2
J3
B3
B2
B1
Control compartment
Do not apply extraneous
voltage via K2!
DANGER: 230 V
The potential-free contacts of external moni t or ing devic-
es (e.g. ventilation interlock, safety high limit humidistat,
airow monitor, etc.) are connected in series (external
safety chain "K2") to the terminals "SC1" and "SC2" on
the driver board in accordance with the wiring diagram.
The connecting cable must be led through a cable gland
or grommet into the control compartment.
Caution! A high limit humidistat is highly recomen-
ded to prevent risk of over-humidication and potential
damage to property.
Note: If, for whatever reason, no external monitoring
devices are connected, a cable bridge "J3" must be
installed on the contacts "SC1" and "SC2" of the ter-
minal block.
CAUTION! Do not apply any extraneous voltage to
contacts "SC1" and "SC2" via the contacts of the
external monitoring devices.
Connecting the demand or humidity signal
CONT. SIGN.
GNDINV+
+
A1
Y
24V
10V
JP1
24V/
10V
Control compartment
The signal cable of an external controller or of a humidity
sensor (if the internal P/PI controller is used) is to be
connected according to the wiring diagram to the ter-
minals "IN" and GND" on the driver board in the control
compartment. The admissible signal values can be found
in the technical data table in the operation manual. The
connecting cable must be led through a cable gland or
grommet into the control compartment.
Note: if the external controller or the humidity sensor
shall be supplied with 10 V or 24 V from the driver board
(terminal “A+”), the jumper JP1 must be set to 10V or
24V accordingly.
Note: The admissible humidity control signal values
can be found in the technical data table in the operation
manual.
If a shielded signal cable is used, connect the cable
shield to terminal "GND".
Caution! If the signal cable shield is already connected
to a po ten tial or a grounded conductor, do not con-
nect it to terminal "GND".
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair EL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair EL in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair EL

Condair EL User Manual - English - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info