802890

Concept VR1000 Manual

24
Zoom out
Zoom in
Previous page
1/59
Next page
46 47
ENEN
VR1000 VR1000
List of parts
1 Docking station 1x
2 Left and right brush 2 pairs
3 Wiping cloth
4 Spare filter
5 Cleaning brush 1x
6 User manual
7 Water tank
8 Remote control
9 Adapter
10 Magnetic strip
USE
CHARGING
Note: If the robotic vacuum cleaner does not automatically find its docking station, you may manually sent it back to the
docking station to charge.
1. Place the docking station against a wall and remove all obstacles located on each sides of the 1.5 meter radius.
2. Put the vacuum cleaner into the docking station and make sure that their charging contacts touch. The charging of
the vacuum cleaner is indicated by a flashing white indicator light. Allow the vacuum cleaner to charge for 12 hours
before first use.
INSTALLING THE SIDE BRUSHES
1. Turn the unit over.
2. Adjust the side brush to its place once the unit is upside down.
3. Press the side brush until it clicks into its place.
4. Make sure that the side brushes can rotate freely.
CLEANING
1. You can start the cleaning by using one of the following options:
2. To start cleaning press the button.
3. Press the Start / Pause button on the remote control.
Note: If the vacuum cleaner is turned off, you need to press the button for 1 second to turn it on. Turn the vacuum
cleaner off by pressing the button for 3 seconds, until the red indicator light starts flashing.
MOPPING
1. Fill the water tank with water.
2. Insert the water tank assembly back into the vacuum cleaner. You can start the mopping by using one of the following
options:
a. Press the button to start mopping.
b. Press the Start / Pause button on the remote control.
1 2 3 4 5
6 7 8 9 10
USING THE REMOTE CONTROL
1. Display
2. Selecting the cleaning mode
3. Start/Pause
4. Setting the cleaning pre-set
5. Return to the docking station
6. Setting the suction power
7. Direction keys
8. Time setting
Note: Insert two supplied AAA batteries included into
the remote control before using it. Remove the back
cover and insert the batteries correctly.
In order to prevent the vacuum cleaner from
accidentally falling down the stairs, the backward
direction is not available on the remote control.
To ensure that all the correct settings are effective,
you must point the remote control at the front of the
robotic vacuum cleaner from close proximity.
REGULAR MAINTENANCE
Cleaning the dust container
1. Press the button and remove the dust container.
2. Press the release button and empty the contents of the dust container into a bin.
3. Rinse the dust container, foam filter and filter with warm water. Let it THOROUGHLY dry for 24 hours.
Cleaning the water tank
1. Once the cleaning is done, press the release button and remove the water tank.
2. Open the tank and pour out the remaining water.
3. Wash the wiping cloth and let it dry.
4. Wipe the water tank dry and set it aside.
Cleaning the main brush
1. Press the button of the main brush cover and remove the cover to access the brush.
2. Clean the main brush with a soft cloth or warm water. Dry it THOROUGHLY and reinstall it.
Cleaning the side brushes
1. Pull out the side brush.
2. Clean the side brush with a cleaning brush or cloth.
Note: Check regularly that there is no hair entangled in the brush.
1
5
62
3
4
7
8
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VR1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VR1000 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info